开云体育

Right now, offer it for trade for the one you meant to order. That'll be the fastest. 73 Jim N6OTQ [email protected]> wrote:

I did send Hans an email with pictures of the box before I opened it. Once he is back from his travels and can respond we will figure out best path forward.

How about letting Fedex pay to replace it? 73 Jim N6OTQ [email protected]> wrote:

* Here is a little better picture of all 3 in a line

Can you post a higher resolution picture so the experts (that's not me) can give a good opinion about the degree of damage. Easiest way to fix this is to order a set of the SMPS boards (Switching-Mode

I admit, I am a dummy!? I'd like to build a QMX or two but have never purchased the kit because I don't fully understand how to install the software.? (I built some QCX but the program was already

Don, why not put the capacitor in place of C403 and short the L401 tap separately? Is something avoided by not using the PCB trace from the capacitor to the inductor tap? I ask because I'm trying to

Hans is traveling so he won't get back to you for about a week but use the support ticketing system. Colin - K6JTH [email protected]> wrote:

I very recently ordered a QDX but for the wrong frequency range. What is the best way to contact them to correct my order? Thanks!

Received my QMX mid band yesterday and half of the box was crushed during shipping. The only "damage" ,if you would call it that, I originally saw was that one of the boards was already separated from

Does anyone know the rough weight of the QMX+? I've ordered one anyway of course, I'm just interested what I'm going to be putting my back through when out and about with it...

My suspicion is that it might have something to do with your antenna system. I have had this same thing happen with multiple radios. Turned out to be connectors that tarnished and the RF reestablishes

Jim - congratulations!!! But not only a working QMX - also one with a PA efficiency of more than 100 %!!! ;-)) Maybe the current value is not so exact. For rf sweep the signal is going through LPF AND

I already have a QLG2 which I use to set the time on my QMX. I'm looking forward to receiving my QMX+ kit, which I ordered *without* the QLG3 option. *I was wondering if it will still be possible to

Please disregard my post. Operator error : ( -- ————————- Jim N7RCS Palm Bay, FL

With my HB Rev 3 HB QMX connected to N1MM I notice that the manual time I set on the QMX does not agree with what N1MM displays. The times differ by exactly 1 hour. Any idea what may be causing this

Hi Matteo. One thing to try is a manually triggered factory reset if you've not already done that. Sometimes an additional reset clears up some initially seen issues. Using a DMM you should post your

Karl, I have one of these as well but it is not "quiet". There is significant switching ripple on the output which?I "fixed" with a 1000uf capacitor soldered on the top of the board. Gary W9TD

I wonder if anyone has tried using a more refined encoder with the QMX, something like a 400ppr unit? Can the QMX keep up? I don't have a QMX yet to try. Steve G4EDG