开云体育

Thanks Ron you were a great help.

I have been a user of Ham Radio Deluxe for as long as its been around and I find that I'm having no trouble on RTTY using Digital Master, also known as DM780.? I did some experimenting this afternoon

Any size that fits is fine. I think those are 1/4 watt. Sounds like you found the problem. Good luck. …. Ron

Just completed my Rev 3 QMX assembly. It performs the USB stick emulation ok, to place the FW file on board. I did this both on initial power-up and by jumpering AUX2 to GND.? However, after FW load,

Valentine Michael Smith is back.

Placed the order on 8th Sept.

Hi Ron: I checked the schematic and found the junction of R39 and R40. I was able to connect the 2 resistors. The voltage readings did not change. So I checked the ohm value of the two resistors and

Yeah that sounds about right. It is a special case after all. Could be something the dev is working on, never know. Maybe give him the suggestion along with a good app rating just in case. And if he

Jason, I can't see any way in iFTx to send a custom message like you mentioned, you just enter your own callsign and locator, it is not very functional as yet and needs attention from the

The other setting that I found worked was running at 27mW vs low power. John KK4ITX ?Each mistake is a learning opportunity.?

yes there are clear instructions about this on the sotamat website, basically sync your data on your phone before every outing.

Solved my own problem when determining that the pot itself was faulty. I'm ultra careful when building, so I was surprised. I just ordered four gain pots from the store. One to replace the buggy one,

Dave, how long was it on order? K7ULM

w6csn: very true!? you will def not get spotted trying to spot with a k-* park anymore. Richard: I haven't but plan to this weekend for the first time.? You're not going to have any luck with the

Thanks.? I just assumed that the radio used the same BFO for both modes and the difference was just the CW filter.

This reply actually has nothing to say about the iFTx QMX usage for SOTAM?T, but it occurs to me that with all the recent changes to park numbers in the POTA system, we’ll probably need to redo our

Great post, thanks . Mike Krieger wrote:

Hi All Has anyone had any success using QMX with SOTAMAT for self spotting? ( https://sotamat.com/ ) I use an app iFTx (which needs more work doing to it to make it more user friendly) My setup

Great write up Nick. Hans is a master with the designs of his kits. I truly enjoy building his kits! 73 Kurt - W2MW Sent from my iPhone 11 Pro

I received a version 1 low band QMX in July 2023 so 9 months ago now. I finally got round to building it and I'm going to write up my experience here. Firstly the manual and instructions were