开云体育

On Thu, Aug 24, 2023 at 01:06 PM, Rick Williams - VE7TK wrote: oops ..... > > So for some reason Q103 and Q105 are *NOT* being turned on -- 73, Rick VE7TK Website: https://www.ve7tk.ca/ (

Hey, Cliff. So, the gnd hole you spotted doesn't have anything in it. It must just be the way it looks in the photo. For getting audio in, I followed someone else's advice and reloaded the firmware. I

Steve, Dimension 4 works with Windows 10.

Consider yourself invited to do so. Hans will do the build as previously agreed. I will make one addition. See September QST page 33. I have downloaded the software. Your past kindnesses has not

Glad to hear it, Karl! Good luck with the flea sized solder surgery! :D

Wayne, L12 is for receive BPF so it shouldn't affect Tx. Of course make sure the blob isn't hitting something else that it shouldn't be. In the first photo it looks like solder in the "GND" pcb hole

Does anyone have an idea what role L12 might have as it relates to my problem. I had a bit of trouble getting that one wound, but I did finally get it. I do, however, have a small tower of solder that

Thanks for that info! I downloaded and installed the latest and found the QRP Labs radio config. No, it didn't fix my problem, but it was certainly worth a try.

I have several of the ViFly for my FPV drone hobby builds. Hadn’t considered using one in the application but I bet it would work great. It trips very quickly, but I haven’t measured the exact

Ok. What happens after the CAT test and you push PTT, does it turn red? Another click on PTT turns if off. Tested your radio config and it works FB here. FYI, if you have the latest Wsjtx there is a

Do a factory reset and try again -Mike/w1mt

hello Rick, Hello Hans, this is exactly what I was aiming for myself: a temporary replacement of the smps boards until all other smoke tests have been succesfully passed. Hans: really no offence

Hi, Chris. Thank you so much for your reply. Here is my PC audio setups for the QDX.

Certainly. Here are my setup pages for Radio and Audio. When I test the CAT, the button does turn green. I am able to change frequencies through WSJT-X.

Check that the QDX audio output in the PC is on.? I had this with my QMX and it turned out that the QMX sound output wasn't turned on. Settings - sound look for the QDX and check the volume is 100%

Wayne, What did the CAT Test and PTT Test show in the Wsjtx Settings/Radio page? Maybe post a screen shot of your setup. 73, Cliff, AE5ZA

Rick, Second arrived! Been gone all day and just got back. Thanks for the time, effort and the stuff! One going in as soon as I recover from my day trip! Will report soon! Karl

I can take a look at it for you if you want. ?I’ve fixed about 20 of the QMX rigs for other hams.

OK all. A big plus, but my troubleshooting isn't totally complete, yet. I now can receive and decode! See below for a screen shot. As far as transmit; though, I'm still not there. I can now transmit

Barb, Documentation for Dimension 4 does not indicate whether it is compatible with Windows versions beyond Windows 7 and 8. Do you know if is compatible with Windows 10 and Windows 11? -Steve