开云体育

Thanks Steve Nice guide! I hadn't read it before. Note the image at the top of the page: G0UPL (me) in the lower trace ;-) This is my so-called "Junkbox" beacon I ran in my attic for 6 months.

I have multiple sound cards in my Windows XP computer and Argo would only use one of them no matter what the settings are. This seems to be a bug in the ARGO software. 73 Jay W9IUF

Greetings to the group. I'm unable to get ARGO to work with my Signalink USB external soundcard. ARGO wants to default to my onboard soundcard instead. Any idea how I can change this? I don't want to

Guys, For those of you who need a "Receiving QRSS 101" you can do no better than look at the website http://www.dxzone.com/cgi-bin/dir/jump2.cgi?ID=16403 . Regards, Steve G0XAR

Hello, I just put my QRSS kit from Hans Summers on the air a couple of days ago and would appreciate hearing of any "sightings" of my signal. What are the "various online grabbers" referenced in the

All, As Steve says, if you join the Knights QRSS group (link at the bottom of my page http://www.hanssummers.com/qrsskit ) and announce your beacon operation, you will see that when people see your

Crystals are available from the Genesis Radio group for this and many other frequencies of interest to the QRSS band of people. Typical cost is less than a dollar plus postage. see

Jim, I have had a similar thought, that there must be a 'better way'. It doesn't have to be WSPR, but some easy method of reply/confirmation. In the meantime, if you see my call on 30, pse let me

this page has been kind of wonky for several months now. I wonder if he is aware of the problem. WEB - "The VE7SL Radio Notebook": http://members.shaw.ca/ve7sl

Jim, The usual procedure is to take a screenshot of the signal and either to post it here or on the knightlights reflector. That way we all get to share what you have received. The owner of the

I bought the kit at FDIM but have not assembled it yet. ?However, I have been running the software and watching 30M 10.140. ?Here is my problem... ?I see some callsigns but what do I do with them?

The following QRPLabs poll is now closed. Here are the final results: POLL QUESTION: Hans and I are CONSIDERING doing another batch of beacon kits as we are being asked for more but are sold out

Hi Guys, Hans and I have sold out of kits and people still want them. So we intend to do another 100, 50 for 30 meters, 25 for 80 meters and 25 for 40 meters. I hope to have them ready for the end of

Just finished the beacon I bought from Hans at FDIM. Got code on pin two, but no discernible code from the output. It appears that pin 3 is at a constant 5 volts. As soon as I get time, I'll get

Hi Steve , Thank you for the information . I saw where Hans had mentioned that he might offer a kit for 40 and 80 , so I was curious . I have been operating a QRSS60 LowFER beacon for close to 10

Charlie, The best places to look for QRSS activity are: 3.500,000 - 3.500,100 7.000,000 - 7.000,100 10.140,000 - 10.140,100 Most of the activity is on 30 meters and you can generally rely on a

Hi Mike. I will have to remember your beacon the next time I am driving by your town. Take care, Mike WE0H w9qs wrote:

Can anyone please tell me if there is a "standard" frequency for each of the different bands , for operating QRSS , and a list of what those frequencies are ? Thank you , 73 , Charlie , W5COV

Enter your vote today! A new poll has been created for the QRPLabs group: Hans and I are CONSIDERING doing another batch of beacon kits as we are being asked for more but are sold out though we do

Hello to the group. I have the 30 meter beacon up and running into a dummy load. It seems to work. I need to set the shift and will look at it with the scope later tonight. I'm go hang a dipole in