Keyboard Shortcuts
Likes
- QRPLabs
- Messages
Search
Re: QDX not receiving after replacing blown transistors
On 3 Feb 2023 at 20:06, 9V1SA wrote:
Or is it just a case of pot luck then cover the wires withread the comments in this thread. many postings have indicated units that have been found to have NO RFI problems ... the ones I recently posted are perfectly clean in my experience. w2jc |
Re: Balloon over
I bet it has a self destruction device.... On Fri, Feb 3, 2023 at 10:33 PM Mark <venchant@...> wrote: Sounds like a job for our newly created Space Force to have fun with a goal of bringing it down safely? over US territory and give it a good examination. |
Re: Balloon over
¿ªÔÆÌåÓýIf you can¡¯t enjoy the absurdity of it all, please just mute this topic..... these interruptions to windings and blown components are relaxing. ?And to boot many folks here actually fly balloons and it is interesting if not hilarious, hey, some want to send an F-22 after a balloon.... that¡¯s not a fair fight !John KK4ITX? Visit: ?. ? ? On Feb 3, 2023, at 22:33, Mark <venchant@...> wrote:
|
Re: QCX+ 20m Receiver sensitivity way down
#20m
#problem
#troubleshoot
RESOLVED: Turns out IC4, the FST3253, was the culprit.
Thanks to everyone how responded and helped out. Its a testament to how awesome this group is. -- regards, Bryan, N0LUF |
Re: LED2 ?
On 03/02/2023 19:39, John via groups.io wrote:
As soon as I bring up the card on WSJTX 2.6.0 LED2 is OFF?John, Ignore it /g/QRPLabs/message/96809 there never has been any details, it was just for the initial QRP Labs setup. 73 Alan G4ZFQ |
Re: Balloon over Canada
¿ªÔÆÌåÓýHans is not only on vacation, but has a very light moderation touch.?You are welcome to run your group as you choose.? Please notice the links at the bottom of _every_ emailed post offering to ¡°Mute this topic¡±.? 73, Willie N1JBJ On Feb 3, 2023, at 2:50 PM, Joe WB9SBD <nss@...> wrote:
|
Re: Balloon over Canada
¿ªÔÆÌåÓýNothing new. When Sputnik 1 was laughed [LAUNCHED - thank you dictation software], the Daily Express asked why the RAF didn¡¯t go up to shoot it down.John F5VLF G3PAI
|
Re: Corrosion on IC pins (QCX+ build)
Thanks, Cliff, for the heads up! This is the plus version but I¡¯ll try to be conservative with the voltage.? I tweaked the BPF a bit more: took a winding off from both L3 and L2 and this gave me more range for adjustment. Now I get about 4.5 W @ 12 V and closer to 6 W @ 13.8 V. These readings are not from a calibrated meter so take them with a grain of salt. Ted, I¡¯m also planning to use the radio with a 4S LiPo battery back and a buck converter. About 12v should be enough for a signal in QRP range. Lower voltage also gives the buck converter something to work with.? |
Re: Balloon over Canada
This group is a free for all so just join in with your own favorite subject rant! Roy WA0YMH? On Fri, Feb 3, 2023, 1:50 PM Joe WB9SBD <nss@...> wrote:
|
Re: Balloon over Canada
Or delivering Trump's next rambling speech.??? Roy WA0YMH? On Fri, Feb 3, 2023, 1:29 PM jjpurdum via <jjpurdum=[email protected]> wrote:
|
Re: Balloon over Canada
¿ªÔÆÌåÓýWhy is this political BS on here?if I was the owner of this page that person would be banned. Joe WB9SBD On 2/3/2023 1:29 PM, jjpurdum via
groups.io wrote:
|
LED2 ?
I received a new 20-80 Rev 4 QDX some weeks ago and now have time to place it in a case.
It is a built and tested unit direct from QRP-labs. It is a 12v unit that I am running at 9V. Power on -- I see .13 A. LED1 fast blinks while loading code then constant LED1 and LED2. I am guessing I should not have an LED2. I am able to use PUTTY to access the settings options. What should I lookfor before I slide this card into the case? John |
Re: Balloon over Canada
I'd like to see the Air Force poke a few holes in it and after it lands, see what it was actually doing. Personally, I think it was delivering paychecks to Joe and Hunter...but that's just a guess. ![]() Jack, W8TEE
On Friday, February 3, 2023 at 02:12:17 PM EST, JP McGinley <j.p.mcg@...> wrote:
Heard on the news the United Stated spends 850 Billion
|
Re: Balloon over Canada
Heard on the news the United Stated spends 850 Billion
|