开云体育

GE All To put to bed the problems described below re the QDX not going to TX when told to from L32 via JTDX. The problem was due to JTDX not being configured correctly in the JTDX

On March 1, 2018 I ordered some QRP kits that I was advised to get, but due to medical problems until now I did nothing. I had viewed Ham Nations on my TV and they talked about an all mode QRP

Mike, Thanks for the suggestion. I’ve been running my Mac’s Internet link off Ethernet assuming wired would be faster. Not so. Wired, I’ve been getting only about 80 Mbps service despite paying

Never opened, still in box includes enclosure. Price : $90.00 includes shipping lower 48 states. 73 Johm W9QP

Hi all, 'smoked' my QDX too... different reason. But the next time I will insert a shrink tube into the binocular transformer, each side 1mm longer, to prevent scratching the wire on the edges. A

Hi Guys, It’s always worth checking the holes on binocular transformers to make sure that the edges are nice and smooth and therefore won’t remove the enamel on the wire as you insert it and pull

For Evan and Alan - mostly, I observe pretty much what you describe. ?My notes: 1) Win10 laptop, not recently rebooted. WSJT-X not running. ?Power, dummy load or resonant antenna, and USB cable

Hi, I think that sudo *systemctl /disable/ ModemManager* prevents the service from being started automagically when the system boots but other software can still start it if they depend on it. Maybe

Shirley thanks for the calculation. I did that modification and now RBN is spot on so I am much better with the QRG now. Martin DK3UW

Amen to that. We had a ground-strike about 8 years ago that came in through the CATV drop. Whacked my cable modem and router and everything that was hardwired to the router (shack computer, echolink

I live in a lightning-prone location and that’s been my experience with telco amended to cable broadband. Lightning zapped a cable modem and the ethernet port on my Mac. I’ve since added toroids

Hi all This applies only to Linux users. I knew this a long time ago due to QSX development. But it got forgotten in the mists of time. Now in talking with Chris KC0TKS about an issue on RPi400 (no

I think I might have damaged the PAs or Q6: power output is now much lower than before. So I jumpered? the LPF (L1 - L3)? and measured the square wave output to the 50 ohm dummy load with my scope

Sorry for the pain! Just have more important projects and thought I would try and help someone who missed the first run.

I use gas tube suppressors (polyphaser)? mounted to a copper plate on the ground rod inside a weather resistant box.? That's before it ever comes into the house.? Its house protection as?anything

I'm selling my nearly new 1 month old QCX PLUS 40 meter cw radio with the 50 watt amp. The amp is still in kit form and has not been opened or built. My el-cheapo wattmeter shows the radio putting out

Hi all, I ran JS8CALL with the QDX for about an hour into a 50 W dummy load. I configured it to send a heartbeat message with an interval of 1 minute. Then after about an hour the frequency was

"Hans Summers" <hans.summers@...> wrote: Did anybody notice that the Mighty Mite and the Dad look like twins? Same nostrils, same face shape, same sideburns? Wow! 73 Jim W4JED

Mike Perry, WA4MP Nov 13 #74532 ( /g/QRPLabs/message/74532 ) ...? ? for what its worth, I find that the magnifier on my head or on a desk lamp boom works much better then the budget

These are the offending capacitors in some of the early 20 Meter QCX kits that Hans mentioned. 73, Ben ?K0IKR