开云体育

Hm.? I checked the pot, and it looks fine - but for good measure, I reflowed all three connections.? Didn't fix the problem. However, I've discovered that when I key down, the clicking goes away,

Nope, S-meter is not enabled - this literally starts as soon as it's powered on, even after a factory reset.

Yup... re-solder your volume pot. ;-) 73, Stephen VE6SVJ Sent from an electronic device.

Did you enable the S meter? ?On my 20m QCX it makes a sort of clicking sound with the S meter enabled. ?Disabling the S meter completely removes that clicking sound. Curt M.

I just got my QCX-20 assembled and i'm having an issue I haven't seen talked about (though I could just be blind) - without plugging in headphones, I started trying to align the BPF, and couldn't get

As Alison says, either The BS170s or source resistors are going to be burnt out. BEFORE replacing them find out why Q201 is not conducting to reduce the bias voltage. What is it's base and collector

As I was having me breakfast, ( Man ! That pink grapefruit was yummy ! ), it occurred to me that, based on my low output power on 80m from the QCX-17 comment, someone might think that I had destroyed

HI, I'm really trying to keep all question here on the group and not in private email. I was trying to bring linear PA back to life – as I see, the problem is that I have +12V on gates of BS170 in

Hans, does this mean that if a prototype is shown at Friedrichshafen, the QSX will be released after the fair? ;-) That would mean release in july. No worry :-) Regards, Stefan

Forgot to mention. CHU 3330 kHz is also roaring in on the QCX-17 tonight. 72 / 73, Bill, N4QA

Wooooooohooooooo! Sent: Friday, April 12, 2019 3:19 AM To: [email protected] Subject: Re: [QRPLabs] Friedrichshafen 2019 Hi Steve Please, will you have a stand at Friedrichshafen this year? Yes. My

Tonight, I'm running the QCX-17 on EIGHTY METERS ! While transmit power is down near zip point zilch, the attached screen shot shows what I'm seeing ( and hearing, quite loudly ) on 80m FT8 on the

Thanks for the info. Regards, Gary W0CKI

Try to address >THEM< directly. qrpguys@... I included 'THEM' in this posting, too. [email protected]> wrote:

Recently discussed at length here:?/g/QRPLabs/message/30865

Not to worry, you'll get your order. They only ship once a week and if you order on the same day as the pickup, chances are it will be a week for the order is shipped. That said, they are as reliable

Kinda off topic but, has anyone had any experience with QRPGUYS? I placed an order, it's paid for but I have heard nothing in over a week.

That's pretty much it, Dave ! I'm keeping a couple of fingers on Q1, Q2, Q3...so far, so good. Supply voltage = 13.8 VDC Power output level somewhat different for each band. FB on Forest We might try

Well, well, well ! Just told my QCX-17 that it's a QCX-60 and, WHAMMO ! It just received its first RBN spot on 5331 kHz from KM3T in New Hampshire, I think it is. Don't worry, keeping a watchful eye

Bill, You have external filtering, you tell your QCX-17 that it's something else, and you go to the frequency you want. Do I have that right, or is there more to it? How do you keep from cooking your