开云体育

Who will be the first to work WAC and DXCC with this? I throw down the gauntlet...!

I’m looking forward to seeing it, I’m guessing STM32F103, Si5351, IRF520 and FST3253? I’m curious about the FM though. I think this one might make it into my shack as a permanent

Previous customers get first shot..especially those who built the QCX80, as compensation for the agony of T1! -- de K2TL.. since 1964

Cannot wait to melt some more solder! Nigel M0NDE [email protected]> wrote:

Oh no, you didn’t watch the complete video. Hans is going to make it multi-band. If I remember correctly, 160m to 10m, including 60m. AM, SSB, CW, CW keyer, USB keyboard, CAT control and all the

Yes, Hans says in the video it will eventually cover 10 bands, 10-160m with a plug in filter board. Clearly another winner, amazing! 73s Ted

Need a pre-order URL! ;) doctorcwp@...> wrote:

Watch the video. The answer is YES, 160m though 10m. 73, Charles - NK8O

Q answered at 4:40 - 10 bands eventually - that's great!

I wonder if it will eventually be offered for other bands...

oh now this looks awesome! (QSX40 vid) https://youtu.be/hL6CWaY438Y

Replaced the green? caps (L25 and L26) on the 30m QCX. Used 560pF SM 805 size with C0G temp characteristic. Result - the lag problem fixed. Then removed 1 turn each from L1, L2 and L3. Result - power

Cap C1 can be something of a problem alright. First of all, the range from fully meshed to unmeshed takes only one half turn, 180 degrees. If you look at the cap carefully you can see what position

“I'd like to alternate between using the keyer and the straight key without changing connections…” – try tying the straight key to either of the paddles.* “…or firmware settings” –

Clarification:? I'd like to alternate between using the keyer and the straight key without changing connections or firmware settings.

Oooohhh.... YAY, new toys! 73 Nick VK4PP

This may be simple enough for me, if I understand what you want to do. Does “use the straight key and built-in keyer at the same time” mean simultaneously, or alternately without having to uplug

Brian It is easy to pump too much current into a bs170 and kill it off, at 5 0r 12 volts. While is some rigs a trio of bs170s can provide 5 watts, the u3s is limited by the available drive from the

LL At least one builder had a defective trimmer cap, so carefully examine it. Possibly you have something not connected somewhere. I would poke around with my finger with that test oscillator

(The original subject line for this thread was Re: QCX Tune.?I added #qcx. If this launches a new thread, then search "QCX Tune" for the prior message context) I also want to be able to use the