开云体育

It is more likely Tariffs are applied when the carrier, has to supply paperwork to the country. If the carrier has to prove or back up origin and cost, those costs will be passed on because the

5.5 x 2.1 is correct. 73 Hans G0UPL http://qrp-labs.com https://buymeacoffee.com/g0upl [email protected]> wrote:

*YES!* *5.5 x 2.5mm* plug works with me QCX QDX QMX QMX+ even my 5volt working QRPp QDX 73 DE muhsin TA1MHS

Tariffs are assessed on import into the US, not when ordered from Turkye.? Whatever the % may be.

In any case, I'm glad I ordered my QMX+ earlier this week.

Hello Ivan, which microphone did you use? How is the quality of the mic? Thanks, Daniel

NO!? You need the *5.5 x 2.1mm* plug.? The 2.5mm version gives intermittent contact. The long one, at least 12mm. Chris, G5CTH

Hi I found and using this 5/9/12 (15/20(for the PC) if the PD of the Power Bank Supports) 9 and 12 volts are great for the QDX, QMX and QMX+ Buy the one with *5.5 x 2.5mm

Hi If you connect QCX to GPS, you can (it will) precisely adjust frequency of the QCX for the TXCO This was implemented for WSPR on QCX If you leave the GPS on, you'll have an atomic clock/frequency

True Bruce, I was going by the marking on the QRPLabs TCXO, "KXO-84 RG" which matches the Geyer part. Unfortunately digital stepped adjustment TCXOs also do not state what they are. 73 Alan

Did you remember the loop between the bnc and the output from the swr bridge ?

Alan. ?The distinctive feature of the QRP labs device is old style analogue adjustment )as random digital steps don’t play well with some digimodes The data sheet you posted makes no mention …

Wow, I'm impressed! :)

Rick, Wolfgang was showing us his QMX, no + :-) Perhaps left for those with good soldering skills and steady hands. 73 Alan G4ZFQ

Pierre, It looks like this one https://www.geyer-electronic.shop/downloads/products/1297509/12.97509.pdf 73 Alan G4ZFQ

I was trying out WSPR with my high band QMX with settings as depicted in the instruction manual. I had my QLG2 attached and working with the green light blinking. I had the transmit set to 4 after the

Actually I thought I read that the QMX+ already used the stm32 RTC output ?

Just to satisfy my curiosity : which TCXO chip comes with the QCX+ TCXO option? 73 - Pierre - FK8IH

Most all recent USB-C power banks support PD, so it is likely to work. I would get a smaller/lighter one.? I have two small 10,000mAh Ankers, and each is good for several hours of QMX operation.

Just retried a change of tcxo frequency down by 6 Hz. As before it did not work...audio connectivity was lost and had to do a master reset to get it back. Very annoying as have to customise? my rig