开云体育

The button-click which currently switches between cw and ft8 should cycle thru cw, ft8 and ssb. And there could be an option "enabled modes", similar as "enabled filters", "enabled vfo's" and "enabled

I just wanted to mention the great service I received from DHL (& QRP-Labs). I ordered last week on Wednesday afternoon. My kit was shipped on Wednesday and DHL promised delivery on Monday, which is

Hi Mark Hi hi, I don't think that article can be effectively skimmed! I read it from start to finish countless times on screen, then printed it out and stapled the pages together and read it

Joe, I agree, the QMX mid-band is my go-to radio as well for portable ops. -- 73, Dan? NM3A

I am having the same problem. However, if I use my kenwood ts 590sg and transmit the QMX+ hears it with no problem. ?But it doesn’t hear nay other signals on any band. ? Looking for ideas. bob,

That behavior might simply be the known condition: The QMX needs to be OFF when you connect the USB cable to the PC.The cable must be a data capable cable. Some are only for charging.Then power on the

Helpful information would be the kind of computer you're running. "Device Manager" sounds like Windows? Which version? (I'm utterly useless here, but others will know.) Have you tried a search in the

My QMX receives OK and goes through the various menus, but doesn't transmit. So I thought I would get the terminal software running to do some diagnostic checks. I've identified the COM port being

I love the filters as well, in fact I love the QMX so much it's all I use now going out. I will occasionally use? the QCX if I'm working on one band.

Hans TNX agn for the QMX suggestion lQQking forward to firmware 1.00_026, 09-Aug-2024 and your CW Filters Submenu...playground :>) ""John, a DSW-II maybe ? My fav CW rig ! ? ...n4qa...""" Bill Take

BRAVO! ________________________________ Sent: Monday, September 30, 2024 3:01 AM To: [email protected] <[email protected]> Subject: Re: [QRPLabs] #qmx SSB Update .. Oh Lord, won't you buy me a QMX

I have zero interest in CW, I bought my QMX for FT8 and the possibility of other data modes. SSB will be a welcome addition. The only unnecessary hardware is for the key ?

Hans: No worries, I soldered the MIC in my QMX Mini mid-band build anyway, I'm a completionist :) By the way I used the new build I finished a few days ago on a POTA activation last Saturday: AI5DD

John, a DSW-II maybe ? My fav CW rig ! 72, Bill, N4QA/QRP

haha not a porsche or a mercedes benz ??? 72 de Matt

Sounds like the PCM1804 to me. I had a similar problem with a 1st batch QMX+.? Jeff Moore has previously posted on how to check it, if you have a scope and a way to inject a signal into the BNC. See

Hans, Really interesting information on CESSB. I skimmed Dave Hershberger's article (I will read the whole thing again after work today), and I noticed this comment in his conclusion: The final

Hi Stan - there is no sidetone when transmitting. There is no receiver noise. Since my receiver has never worked I’m not sure if the display is to show a volume indication level. Disconnecting the

YEE HAW !!!!! I can see position ONE from where MY order sits !!! 72 ! -- N4QA/QRP

I also find this use interesting. However, the increased size of the firmware might preclude the other planned extensions, such as the user programmable BASIC modification. Thinking back on a