开云体育

Greg's point is good.? It could be a failed PCM1804, or some soldering bridge issue shorting one of its bypass caps, or a broken L402 which would not let the PCM1804 get VDD power. I would also check

Hi Bill. My 10 meter QCX Mini seems to be peaked with: L1 = 10T L2 = 13T L3 = 9T L4 = 8 T T1 = 14/3/3/3 With these I get about 2 watts output and Level 8 on the BPF filter alignment at mid range on

Also checking in to say that everything about my QMX mini midband went smoothly. I took my time and now I want another one just for the fun of the build. All my 73s go to Hans!

Thank you, Hans. Meanwhile, would anyone who has had success with the 10 Meter QCX Mini mind sharing specific toriod turns used for best performance? Many thanks, Bill? W3WJ

I mean, I figured, but it seemed like a good idea to ask :-D

700 F! If C your radio might go up in flames! -- 73, Dan? NM3A

Hi Hans, Thank you for reading to the end of my message : ) And in hindsight I should have mentioned I can already use the QMX and my PC to do JS8, this is how I tested the APRS functionality and

Just to be clear: while I have had frustrations, and genuinely despair of getting my first QMX+ build up and fully functional...I am neither giving up on that build, nor on QRPLabs kits. I am a novice

I had the opportunity to take part in the challenge tonight. I tried to log onto Discord following the link on the QCX challenge but the whole site looks completely different and the link came up as

I meant two QCX Minis previously :)

I too recently built a QMX-Mini Mid Band, I did it over a week in a section a night, checking double checking. It helped that I had built two QMX Minis previously (which I learned a lot from). Good

So I just had to make this post because we mostly read here about the problems and issues some people are having with their builds. My first real kit build in three or four decades.? I recently

While FedEx does not have any update on my order placed last Friday :) [email protected]> wrote:

My experience as well. [email protected]> wrote:

700 F

Your transmitter section and powers look good.? It is normal to have some variation, and it is normal to have to 'play with' the LPF filters on the highest bands to get them to full power.? So for

DHL is pretty good, I got my recent kit pretty fast to Oklahoma.

Just to be clear, 700 F or C?

I have had the dead receiver problem after a build.? I solved it by reheating all the toroid joints with about 12 seconds of heat. running about 700 degress on my solder iron.? Just be careful doing

Great, Robert. I ordered last saturday, shipping was today. Hope to receive it in time for the weekend ;-) -- https://www.dl3by.com ( https://www.dl3by.com/ )