开云体育

Never mind, this issue has apparently resolved itself. Oh! Just a thought, could the battery in my RTC be dead? Thanks --Corey (WB0RXQ)

The clock on my QMX+ seems to be off by a good 30 seconds of so. I've got the built in GPS unit with the GPS Source set to "Internal" and I thought the QMX clock would be synced to the GPS time, even

Thank you gentlemen.? I will work through this.? Both SA are giving me the same information. David, W4DER

I've used ChipQuik and it really is that easy. Make sure you remove all the solder before you put the new chip on. -- 73, Dan? NM3A

Oh for Pete's sake. Pilot error. While testing the RIT issue I had reported in another thread, I had to re-load several iterations of the firmware. Prior to starting I did a factory reset and that

Hi Zhenxing, 3k window is pretty narrow for panning. Is it possible to switch between I/Q mode and CW mode on QMX directly instead of DIGI/CW mode? 73, Wei

My mid band QMX has been working very well since its birth. Today I encountered a real head scratcher of a problem. Power output dropped to less than a watt on all bands. It had been close to five

Everything is possible.? Go round the house and down to the local dump.? collect everything with a complex SMD construction an use the heat gun to take it apart .? No stress - its dead

I thought it was already using 300hz? Or was that for the QCX?

Having just installed the latest firmware upgrade, I was tuning around on 20 meters when I heard a weak signal to try to work. It seemed a good opportunity to engage the new 300hz CW filter. I was,

Hans, it IS my recollection that was partly flawed! I went back to version 21 on my QMX+. This version of RIT allows one to cycle through RIT adjustments of 1KHz, 500 Hz, and 100 Hz. And just like

Feature creep is real. Perhaps some of these requests could be left to the user when the programming system is in place -Mike/w1mt [email protected]> wrote:

Yes, understood, Panel. Another request is showing volume. For people who aren't using the CW decoder there's a bit of space available on the bottom row. Though to he sure in split operation the

Yeah, I knows the display is just as it is. That's why I mentioned, as an option instead of decoded text (not alongside)..

Wow great video, and cool presenter. I will try it Gordon. Thank you.

Freshly tested in CWT and I'm eager to share with you guys. For those who love pan adapter, I have a good news. I managed to fake I/Q streams from QMX's normal audio output signal and feed it into

shoot oh well. Thanks for letting me know before I got into it! These devices are "Relatively" inexpensive. I'll procure a QMX and be super cautious this time. Best regards! ~Gordon

Not in my version, it wasn't! Added since I started building mine! ;-)

I was just doing that as you were writing. No go. Maybe with flux. But it won't be easy Sometimes the answer is considering the labor; "We need to replace the motherboard."

ChipQuick looks like a promising option https://youtu.be/UmD7F0--7Lc The idea is that it's a low melting point alloy that bonds to the solder lowing the overall melting point, thus buying you a bunch