开云体育

Hi Hans, Stupid me.. yes Keyerspeed was 0. Tnx mate! Can't wait, whats coming next! Bye now Durk PA3BYW

Wow, I thought it had to be something like that. The instructions for “normal” computer setup says to make sure it is set to 48kHz, and that is how my new iMac works. I changed the old Laptop to

Problem following firmware upgrade from v19 to v21. QMX+ with Rev1 board. Double pressing the Volume knob scrolls through the bands, as it should. ? UNTIL you've pressed the Morse key. Then the

Hello Durk Could you check your speed setting and see if it is zero somehow? When zero, paddle behaves as a straight key. And I suspect in this scenario the semi QSK, which calcilates it's TX-hold

Thanks Mike That pleasantly surprises me too! 73 Hans G0UPL http://qrp-labs.com https://buymeacoffee.com/g0upl [email protected]> wrote:

Hello friends, Just installed new 1 00 021 just to see if semi QSK would work for me. My keyer setup is as follows: Iambic A, semi QSK on. Connected my twin paddle (squeeze paddle) but Keyer does'nt

Han’s does a complete circuit description in the manual which is on the QRPLabs web site. Dave

Here is another Dave thinking that those LP filter boards would be very useful if one were careful with SMing the coil leads. I would love two. Dave VE3GSO-VE3EI

Hi Skip, I know this issue on older Macs. It’s not caused by RFI. The fix is easy, just change the output sample rate of your IC-705’s virtual soundcard from 48kHz to 44.1kHz in Audio MIDI Setup

maybe I have overlooked it somewhere but I would like to find some kind of document explaining how the QMX concept works. Also I would like something like for the QCX witrh voltages at various points

BTW, KS works just fine too. I was pleasantly surprised to see that changes in KS can take place in the middle of a message! Great work, Hans. 73, Mike KK7ER

I have been having this problem with a 2011 Mac Laptop (running El Capitan 10.11.6 and wsjt-x 2.1.2 … it doesn’t support any newer version) for a while now but with an ic-705. The TX audio works

It was nothing about measurements, just for orientation :) Lest assume 20 is "just started, something seems working" and 80 is "almost done, testing" and anything in between is... between :P Something

And Tune should start with the actually selected band.

Actually, Hans replied to me from my post with instructions as to how to order it.? I'd direct a query to him and see if he has more available.

Hi Dave I'm replying off-group 73 Hans G0UPL http://qrp-labs.com https://buymeacoffee.com/g0upl [email protected]> wrote:

Hello Zhenxing Yes, I believe that's normal and it's what we see here too. Bear in mind this is a very simple dump of the IQ data at baseband, without any filtering or other processing. The normal

The KY feature works for me. This opens up some interesting possibilities for those of us who want to program for the QMX. For example, here is Wolfgang's app working now working with the

Hi Pawel I don't know how to measure it, 20% to 80%... progress is hard to judge, and predicted schedules are harder. I do like this picture of my set up while working on it, from about a week ago. I

Hi Jim, as Hans promised, this is working now! Just update the firmware to 1_00_021 and configure N1MM Logger+'s key mapping like in /g/QRPLabs/message/71757 Due to N1MM Logger+'s