开云体育

The screen looks like you need to turn the contrast down with the adjustment screw, if you max it out it will show all black like that... You need to unzip the firmware first before copying it. Adjust

Hi, I had similar behavior when changing to FW 017. I had to go back to 15 then made a factory reset then made a power cycle. I then reboot the FW rev 17, made a factory reset and made a power cycle

This is what I have trouble with. First 80m band looks okay when checking the next band it is random ?And then going back to the 80m it’s also random!?! This is also the case for SWR sweep ?but

Having an issue with the QMX not appearing as USB Flash device anymore on either apple or windows PC. I copied the zipped 1_00_017.QMX ?file into the QMX folder. ?And after the file copied over the

Tnxs Cliff, good to know I also found when playing with the TX Shift Threshold that RSID required less than half the protocol shift for it to work properly. Didn't try to run down the reason. Cheers

Bob, Yes, but the TxID works FB with the QDX, but not with the QMX until it is fixed in the firmware. Used to work with firmware 006, but not since. 73, Cliff, AE5ZA

There have been a number of posts about having fldigi chat to the QDX, so I assume the following is valid for QMX The modes; Thor, MFSK, Domino. IKFP, FSQ, Olivia, Contestia will all work. I have had

The problem is that you're using TxID when transmitting. Fldigi will do most of the modes, just a few like PSK, Throb and I think one or two others that are rarely used. Thor, Olivia, Contestia,

I've been trying to get my QMX to work with FLDigi, and had a long and detailed post typed up recounting my troubleshooting, but I think I may have made a breakthrough, albeit one that leaves me

If you read it in the manual then you’d be right

Not much info to go on, but there's two known issues where this could happen. Your inbox is full. If you never delete emails then there's no space for new one. Or your ISP / email provider could be

I received my QMX the other day and have been reading the operations manual. My brain is sorta overloaded with the attempt to retain all of this info. Has anyone published a 1 or 2 page cheatsheet for

Glad to help if/where I can. Regarding your power out query, my newly built high band QMX is also pushing out about 3.4 to 3.7 Watts on all 5 bands.? The 17/15 pair were originally 5+ and 2.5.?

I think the answer is in the manual. The crystal is normally quite a way off nominal. 73 Alan G4ZFQ

Presumably you got a message from groups.io? If so then just click on the link. It is just one of those unfathomable email things. 73 Alan G4ZFQ

Greg, you know about this? I would have sent an email but... https://www.qrz.com/db/KI4MVX -- 73 Karl KI4ZUQ

Setup was 50Ω dummy load, Greg. I am puzzled by your knob question..please elaborate. By the way, I really appreciate such a quick response! Both knobs are spaced to operate the spst momentary

I've read that some folks are offsetting the 27.000 crystal. Is that the right way to go?

That's a strong indication, Dan...JZ [email protected]> wrote:

Is it my computer or Windows 11?