开云体育

Hi all, I am just about to commence my very first QCX mini build and I just want to get the community's thoughts on what I am considering in doing for winding T1 for the 40 metre band. I am a little

Thanks Reinhard I will fix that. 73 Hans G0UPL http://qrp-labs.com https://www.buymeacoffee.com/g0upl [email protected]> wrote:

Any video on QMX is a good video! Thank you Hans, that you do this work. ( But you still have to work on your acting skills). I had already written elsewhere. EVERYONE who proceeds normally

This was a challenging kit due to the density on the PCB, but the instructions were very thorough and I was able to complete it successfully. I've made a dozen or so QSOs with it and the performance

Dear Karl, I went to the QDX v5 manual and the size of most of the parts in the QDX are 603.?? There is no size given for the 47uh inductors.? All it gives is the inductance value and SMD. so, I

Towards the audio connectors, I meant. Please make sure you've disconnected the radio from power when checking the resistances. Jonathan KN6LFB

Stephan Ahonen KE0WVA <stephan.ahonen@...> wrote: This is a good advice. My 40 W soldering station was too weak (even with the slightly larger tip than I usually use) and I had to use my

I suspect a partial/resistive short from one of the power rails to ground. 1. Can you provide photos of the bottom of the main board and the bottom of the power supply boards? 2. If you remove power,

Dear Karl, I think all the SMD parts in the QDX are 605 size or something like that.? It is real tiny.? My cheapie caliper said the length of it was 1/16th of an inch. Here is a picture of a group

Hans Summers <hans.summers@...> wrote: This is true. Let me tell you that I already managed to make some contacts with the new QMX. I just don't post, because it works :) Firmware still has

Steve MW0KST <stevedavies77@...> wrote: Great to know you fixed it :) In my case the short was exactly at the BNC socket. There's a footprint for the SMA socket there as well, and I had a

Thanks Ron, Will give that a try.? I'm gonna be back in SFO in 2 weeks and will give a try again then.

No wonder Hans cannot keep up with the production demand ... with every soldier and sailor having a QMX in their pocket, they will be like HF pocket phones. LOL

It is doubtful the board is getting hot.? Easy to put a probe onto a convenient location.? Many DVMs come with temperature probes.? (I would consider less than 40C as warm)

I have not tried ChatGPT but here is what Google Bard has to say about the QMX: Me: What is a QMX transceiver? Bard: A QMX transceiver is a type of radio transceiver that uses a quadrature

Mike. Probably all you need to do is calibrate the reference oscillator frequency. The 27 MHz crystal reference is defaulted to 27,004,000 and needs to be adjusted. This is menu item 8.5. If that

Thank you so much for your interest in my problem (s). I think I have more than one problem. The unit won't shut down by pressing left encoder. I have checked and rejected the encoder connections to

What size is this SMD 47μh choke? -- 73 Karl KI4ZUQ

All my co-workers were issued 1740 or 1741A scopes. I was working on higher frequency stuff, so I lucked out with a 275Mhz 1726A scope..with the LED display riding on top. Loved that scope, and was

Hi all, Today I went to activate k-1168 and the vfo said 14,050,50. RBN clocked me on the pita page at 14,052,40.? I checked RIT and it was set to 0.000. I don't have a taco but did tune without