开云体育

OK, so _sometimes_ it’s hallucinations _appear_ to make sense, but if it’s not trustworthy, then what’s the point? 73, Willie N1JBJ

Even GPT agrees with me. Emphasis mine:

And that's what I would tell everyone as a provider of AI services whilst ensuring I was able to mine and use all the private data to train my model and make money off what the customers where

Andre, why not put that question to ChatGPT? Randy, K7RAN

Very interested in hearing about the "smoke test", and first usage! I ordered mine yesterday! ...Dave

Karl, you sent this to the WRONG topic and guy. NOT ME! Checking all messages sent on groups.io, I found the original message as below. Not upset, trying to help both of you. ["Dire need of a

What in the hell does any of this have to do with QRP Labs? Andre, WT9X

I am happy to report I finished assembling the main board in the QMX.? It was quite a rewarding experience.? Easy stuff left to complete in a few hours.? I decided to build for 12V because various

Thanks Mike, I will try tonight and report. --------------------------------- 73 de Marek SP9TKW

Hello, I'm wondering if I can use the Progrock2 with the QLG2 to form a GPS disciplined oscillator that I can use with my Adalm Pluto requiring 40MHz local oscillator? Thanks in advance, Roger

Have you checked this yet? -- 73 Karl KI4ZUQ

UPDATE: ?I replaced the transmit / receive switch Q6 and the ?rig is operating normally again. Jerry N6JH

If you haven't, try a factory reset and retest. -mike/w1mt

Billy, Have you downloaded, printed, punched three holes and put in binder yet? No? Well, don't! I did when I first ordered the radio and built it WRONG! Do print the most recent build instructions

Hi All, I hope you can help me to track down problem which I have with my BPF on newly build QMX. QMX is working ok and it is transmitting 3.5-4W at 9V, I also made QSO on 40m band. Issue I have is

Thank you very much for your advice. I was able to find the error. It was a short circuit on the encoder. I had finished the kit last night and wanted to get started quickly. But as Hans said in his

Hi Evan, no prob’s we are all human :-) Looking at C27 on transmit I noticed that my oscilloscope was reporting 5v whereas my multimeter was showing 50v! All the readings below are with the

There were so many post answering my message that I could not reply to each one. I thank each poster; past, present and future that tack another idea for the first QMX builder. All of the post back to

ps/ps that is (hamSCI.org) n3aaz

Hi Glenn I have not built the mini but have several QCX here Hans has a marvoules design try not to over think T1 on your first kit Build you kit per latest assembly manual and enjoy QRP CW at its