开云体育

Thanks Ken

My order is 72928, so it is 375 after yours.? Hopefully only half the orders are for QMX.? When did you order yours.

Aug, what is your order ID? Mine is 72553 and has not shipped yet. wrote: -- Dale Hardin Elberta, AL

I have to have the control almost in the full counter clockwise position, just about off to lower the volume so it's not ear splitting. I did a search but couldn't find where someone had a mod where a

Tnx QSO, KD4CM. 72, Bill, N4QA

/g/QRPLabs/message/101629

Hi with windows 11 I had the same problem On device manager if you see another com port with the same name with the progrock2 like com4 com4 then disable the computers own com port reboot it should

Dear Hans and crew, The QCX, and QCX+ is the reason for my building the WA5DJJ's QRSS/WSPR SUPER GRABBER.?? It is a very good stable receiver and has done a magnificent job hearing all of those

Sometimes Windows requires you to turn power off on the rig then plug in the USB cable to the computer. Then power up the rig and it will find it. I've seen that almost every time with the QMX. QDX

Tnx QSO, W0LEN. 72, Bill, N4QA

Ah-- The reference to the modem manager is on page 4 of the /Operations/ manual. The reference to the reset thing is in the assembly manual "manual_1_15.pdf" on page 47. Sorry for the confusion! Paul

Hans I ordered my QMX May 21, any idea if this will be in the " first approximately 400 orders." I'm eager to add it to the the QMX to my 2x QCX+,? QCXmini, 2x QDX and 2x 50W PA - I'm addicted! Chris

Tnx QSO, N3HR. -- 72, Bill, N4QA

The original from the movie. About 30 minutes from me. https://thewhistlestopcafe.com/ Mike WM4B

Excellent, Paul! It's great to see another user of simulation on this forum. JZ KJ4A paul@...> wrote:

Sorry Paul, I just downloaded that PDF but I'm still not seeing it there... could you screenshot what you're seeing?

Thank Fanny Flagg for Fried Green Tomatoes in Irondale “fame”. ?And the QMX landed in Trussville…….. Now to sort parts, etc. Aug AG5AT

Sometimes I clip one of those Arduino jumpers onto my meter probe (less than half the diameter of the meter probe). And in rare cases where I'm really concerned I'll tack solder a small wire to the

Ok, then look if this is windows look in the device manager then ports and see if port is found and see what port device manager assigned it. Then go to putty and make sure the port in putty matches

File name is "manual_operation_1_05a.pdf". I'll be curious to see what you find! 73 Paul