开云体育

Hi all I discussed with our FedEx account manager, he agrees it should take 1-3 days (2 days average). If there is a weekend in the middle, add 1 calendar day (Turkey has a 6-day working week).

Tnx QSO, WV8RKL. 72, Bill, N4QA

This mid range option looks achievable with the existing kit, something like this :- Start by not installing the 80m LPF parts, build and test on 60/40/30/20. Add a tap to the BPF inductor at 13 or 14

Hello John I don't know the answer to your question, unfortunately. But I'd be surprised if being 2.5 kHz low on a 25 MHz oscillator stopped it working. I don't think the requirements of USB clocking

I'm curious to see this, but there are multiple versions of the assembly manual, and I'm not finding it... which version were you looking at? And thanks for the other ideas, I'll look into those too.

Hi all, I have the s meter option enabled, but have only gotten it to show up on 1 qso. ?How can I get it to show up? second question, is I lowered the side tone volume from 099 to 005 and now o get

If still available, I'll take it. Dale ks4ns [email protected]> wrote:

I can confirm Cliff AE5ZA observations regarding 1_00_004 firmware and digi modes on my QMX (#133). WSJT-X loads up connects and tests fine, even passing PTT test. But when going to FT8 and trying to

Hans thanks a lot for your outstanding work on your products! I've been dreaming of this USB enhancement so I'll be able to have both a Low Band and a high band QDX at my remote station! I'm away from

Thanks for the suggestion. I've built 4 QCX units and the screen contrast on the QMX was set the same way--reducing the contrast until the boxes were barely visible. No text ever appeared. No home

Hey Mike - that would be an amazing set of bands when I'm out portable.? Nice balance between antenna size and usable bands both locally and DX when hiking. 73/72 Jeff - VE3CW / VA3JFF

My QMX went up in smoke at my initial power up.? One of the voltage regulators on the buck power board blew. Prior to that, I was able to download the firmware using a 9v smoke detector battery for

The row of boxes on the display is likely the "Contrast" pot setting (R47 I believe)....the manual doesn't tell you to turn/set it fully CCW for an initial setting.....i.e. Having boxes showing is

I was able to load the firmware with a 9v smoke detector battery as a power source. And I put electrical tape over the back of the power socket to keep it from shorting against the rotary controller.

Does your computer recognize Progrock when plugged in with usb cable. I was working on a different kit but had a communication problem on the usb connector on the kit causing issue. Once i fixed that

Congrats on the FW progress! My feedback is that the FW update completed and the QMX rebooted and displayed 1_00_0004 on the screen. But the QMX was in a "hang" state and could? not be powered off

FWIW, my Mac would not recognize my QMX at initial power up. however, my PC did recognize it and I was able to load the firmware. I was using a 9v smoke detector battery for power.

Can someone please help me step up Putty to talk to my ProgRock2 I got the screen and port selected but cannot type or connect to the progrock... Thanks Dave

It also works in WSJT-X. However, you can't select it, you have to type the whole string. 73, Uli DF7SC

"I can even initiate a serial connection (with Putty, for example), and the acts like the port is fine. However, there is no response to manually entered CAT commands, and the QDX doesn't go into