Re: QDX order for batch #2 looks like it went through but no confirmation email
I don't have it in front of me but I was #525 something. Perhaps the mail server was just overwhelmed.
On Fri, Dec 17, 2021, 3:06 PM Wolfgang OE1MWW < oe1mww@...> wrote: Same with Order ID #52664
Have it in order history, Visa was charged, but no confirmation email.
My order was within the first 100, so pretty 'early' - will stby and wait.
73
Wolfgang OE1MWW
|
YouTuber who wants to review one but impossible to get
I'm a YouTuber, subject ham radio, would love to review the QDX,? youtube dot com slash davecasler, but can't get one. Is there any chance of getting on a waiting list? 73, Dave, KE?OG
--
Dave Casler
KE?OG
Colorado, USA
www.YouTube.com/davidcasler
|
Re: QDX order for batch #2 looks like it went through but no confirmation email
Same with Order ID #52664
Have it in order history, Visa was charged, but no confirmation email.
My order was within the first 100, so pretty 'early' - will stby and wait.
73
Wolfgang OE1MWW
|
Re: QDX batch 2 sell-out and status
Hans,
? have you any idea what order number cutoff may be unable to be fulfilled? Or will you contact people who may have ordered more than 2?
JP
KA3BWP
|
Re: JTDX is it me for a moment (from THE WHO)
As I said I did erase everything related to the previous install
I use XYplorer which finds anything related to JTDX and I erase them all
I'm waiting
73
muhsin TA1MHS
|
Re: JTDX is it me for a moment (from THE WHO)
Muhsin, as Al stated, there not much difference in terms
of setup between JTDX and WSJT-X
Unfortunately, un/reinstall does not delete or remove the JTDX.ini file.
And in this .ini are all the settings. Same for WSJT-X.
Try to find the directory in C: where JTDX.ini is located and delete it
and do a install of JTDX and a new setup entry in JTDX. Will drop you
an email tomorrow - right now I am 'horizontal-polarized' with my tablet,
in bed... it's midnight now... ?
73
Wolfgang OE1MWW
|
Dave,? I waited until 1200.01Z (just guessing) to make my purchase.? The purchase was going fine, then it wasn't.? In the meantime, I have a QRPGuys Digital AFP-FSK Tcvr III to build.
On Fri, Dec 17, 2021, 4:00 PM Dave Edwards < kd2e@...> wrote:
I think perhaps you cannot order, and place in cart before "go
time".
...Dave
On 12/17/21 4:12 PM, Dale Hardin wrote:
Pedro, same thing happened to me.?
Got stuck when entering shipping address and said "loading"
forever.??
I had mine already on the basket and got stuck
at min 2 after refresh the page 18:04 there not
available?anymore.
Maybe i get one on future Batch but at the moment i am
very disappointed?whit?me.
? ? ? ? ? ? ? ?
?Pedro Almeida
? ? ? ? ? ?
?CT8ABY - CT7ARQ
??
Bill Satterwhite < billsatone@...>
escreveu no dia sexta, 17/12/2021 ¨¤(s) 20:24:
Hit the order button as soon as 1800
showed up on my GPS clock. And completed the order ASAP.
Order number 62685. I bet this 2nd offering sold out in
less then the previous 14 minutes.
-------- Original message --------
Date: 12/17/21 12:53 PM (GMT-06:00)
Subject: Re: [QRPLabs] Successful QDX order
Hey All,
Well got mine in as well #52590, totally missed
the first batch but have been following
development etc via this list with much
enthousiasm. So cant wait to build mine and get it
on the air.
Greetings,
Leo ¨C PA1LDB
?
?
Isn¡¯t every day Christmas??
--
--
Dale Hardin
KS4NS
Elberta, AL
--
Dale Hardin
KS4NS
Elberta, AL
|
I think perhaps you cannot order, and place in cart before "go
time".
...Dave
On 12/17/21 4:12 PM, Dale Hardin wrote:
toggle quoted message
Show quoted text
Pedro, same thing happened to me.?
Got stuck when entering shipping address and said "loading"
forever.??
I had mine already on the basket and got stuck
at min 2 after refresh the page 18:04 there not
available?anymore.
Maybe i get one on future Batch but at the moment i am
very disappointed?whit?me.
? ? ? ? ? ? ? ?
?Pedro Almeida
? ? ? ? ? ?
?CT8ABY - CT7ARQ
??
Bill Satterwhite < billsatone@...>
escreveu no dia sexta, 17/12/2021 ¨¤(s) 20:24:
Hit the order button as soon as 1800
showed up on my GPS clock. And completed the order ASAP.
Order number 62685. I bet this 2nd offering sold out in
less then the previous 14 minutes.
-------- Original message --------
Date: 12/17/21 12:53 PM (GMT-06:00)
Subject: Re: [QRPLabs] Successful QDX order
Hey All,
Well got mine in as well #52590, totally missed
the first batch but have been following
development etc via this list with much
enthousiasm. So cant wait to build mine and get it
on the air.
Greetings,
Leo ¨C PA1LDB
?
?
Isn¡¯t every day Christmas??
--
--
Dale Hardin
KS4NS
Elberta, AL
|
Re: JTDX is it me for a moment (from THE WHO)
As JTDX is based on WSJT-X, it is very much the same for most of the settings. If WSJT-X is working for you, compare the JTDX settings to your WSJT-X settings.
I have been using them interchangeably on both Windows and RasPiOS.
|
Ok, thanks for taking the time to answer!
73 DE KQ9L
|
Hi Rich?
I can't yet, sorry. There will be a few boards that fail to program, have a part missing. On the other hand someone else will cancel their order or amend it, someone will have accidentally duplicated, resulting in more available. It's never simple, believe me. It takes me days and days to sort it all out.? :-(? Until there is an empty box here in QRP Labs Towers, all possible QDXs having been sent out, I won't know which order number we get up to. I can only guess until then and it wouldn't be a very accurate guess. It's hard for you to imagine unless you've been there, done that, just how much correspondence something like this generates and how many amendments are required. It's huge!?
73 Hans G0UPL http://qrp-labs.com
-------- Original message -------- From: "richlim11 via groups.io" <richlim11@...> Date: Sat, Dec 18, 2021, 12:23 AM To: [email protected]Subject: Re: [QRPLabs] Successful QDX order
Can you tell us what is the last order number that will be fulfilled?
Rich KQ9L
|
Can you tell us what is the last order number that will be fulfilled?
Rich KQ9L
|
I'm really sorry not everyone was successful in placing their order. And that around 70 people who thought they were successful, won't be.? I'm doing the best I can but simply put, there is huge demand for what is admittedly a fantastic kit, and I have simply not been able to produce enough to meet this demand. Yet!
The same thing did happen with the QCX in 2017 and the QCX-mini in 2020. It took some time but eventually we were in the situation where everyone who wanted one, could get one. I'm confident it will be the same with QDX. So if you weren't lucky this time please just be patient.?
73 Hans G0UPL http://qrp-labs.com
-------- Original message -------- From: Dale Hardin <joe.dale.hardin@...> Date: Sat, Dec 18, 2021, 12:13 AM To: [email protected]Subject: Re: [QRPLabs] Successful QDX order Pedro, same thing happened to me.? Got stuck when entering shipping address and said "loading" forever.??
I had mine already on the basket and got stuck at min 2 after refresh the page 18:04 there not available?anymore. Maybe i get one on future Batch but at the moment i am very disappointed?whit?me. ? ? ? ? ? ? ? ? ?Pedro Almeida ? ? ? ? ? ? ?CT8ABY - CT7ARQ ??
Bill Satterwhite < billsatone@...> escreveu no dia sexta, 17/12/2021 ¨¤(s) 20:24:
Hit the order button as soon as 1800 showed up on my GPS clock. And completed the order ASAP. Order number 62685. I bet this 2nd offering sold out in less then the previous 14 minutes.
-------- Original message -------- Date: 12/17/21 12:53 PM (GMT-06:00) Subject: Re: [QRPLabs] Successful QDX order
Hey All,
Well got mine in as well #52590, totally missed the first batch but have been following development etc via this list with much enthousiasm. So cant wait to build mine and get it on the air.
Greetings,
Leo ¨C PA1LDB
? ? Isn¡¯t every day Christmas??
--
--
Dale Hardin
KS4NS
Elberta, AL
|
Pedro, same thing happened to me.? Got stuck when entering shipping address and said "loading" forever.??
I had mine already on the basket and got stuck at min 2 after refresh the page 18:04 there not available?anymore. Maybe i get one on future Batch but at the moment i am very disappointed?whit?me. ? ? ? ? ? ? ? ? ?Pedro Almeida ? ? ? ? ? ? ?CT8ABY - CT7ARQ ??
Bill Satterwhite < billsatone@...> escreveu no dia sexta, 17/12/2021 ¨¤(s) 20:24:
Hit the order button as soon as 1800 showed up on my GPS clock. And completed the order ASAP. Order number 62685. I bet this 2nd offering sold out in less then the previous 14 minutes.
-------- Original message -------- Date: 12/17/21 12:53 PM (GMT-06:00) Subject: Re: [QRPLabs] Successful QDX order
Hey All,
Well got mine in as well #52590, totally missed the first batch but have been following development etc via this list with much enthousiasm. So cant wait to build mine and get it on the air.
Greetings,
Leo ¨C PA1LDB
? ? Isn¡¯t every day Christmas??
--
--
Dale Hardin
KS4NS
Elberta, AL
|
Re: QDX batch 2 sell-out and status
It would be interesting to know if anyone bought a large quantity. Hoping to
profit from its rarety and its appeal.
Keep a lookout for Ebay sales shortly.
Ok, I admit I was tempted to buy two, one for this shack and one for the
alternative shack but decided not to deprive someone else...
Anyone want to buy a QDX kit........ only $150 +p&p <VBG> DO NOT ASK...
as a refusal often offends....
bcnu on digi modes 'dreckly, 73 Mike GK8NXD
toggle quoted message
Show quoted text
On 17 Dec 2021 at 23:03, Hans Summers wrote: Hi all As you know the second QDX batch sold out even faster than the first, in a little under 5 minutes. Thanks to great work by the awesome webmaster, the server upgrade to the bigger faster machine prevented any overload issues or crashing. So the ordering could be faster.? Apparently it also let the OpenCart shop software over-ordering "undocumented feature" work even faster than last time. By the time the shop halted the ordering, there were 87 over-orders. I'm sorry, I can't do anything about that. I left myself a reserve of about 20 for unexpected unpredictable happenings but this means there will be at least 70 people whose order I can't ship. A very unfortunate situation. When all the QDX are shipped I will email the people who are at the end or the line. I will offer either a refund if they wish. Or being near the front of the line in batch 3 when it happens. And also shielded against any potential price rise for batch #3. Which is not unlikely, since the chip crisis is still deepening at the moment.? Regarding batch 3. I will have to find an alternative ADC chip and make the necessary hardware and software adjustments. The AK5386 has gone obsolete following the AK factory fire and the prices, if you can find them, are too ridiculous to contemplate. It is going to take me a little time because I will need to redesign the PCB and test a prototype etc. I will provide an update here from time to time. If possible, for batch 3, I will try to make 2,000 kits. 73 Hans G0UPL Groups.io Links: You receive all messages sent to this group. View/Reply Online (#76537) | Reply To Group | Reply To Sender | Mute This Topic | New Topic Visit group: /g/QRPLabsQRP Labs webpage: QRP Labs shop: Your Subscription | Contact Group Owner | Unsubscribe [mike@...] -- Linux is free if your time is worthless
|
It pleases me to see such ravenous competition for the products of Hans and his team's time and effort. I'm a patient ham and will eventually get my grubby hands on one but in the meantime it's nice to see the "little guy" well supported.
Well done, everyone!
|
I finally got around to trying to trouble shoot the Mini.? Turns out the key was causing the problem.? I changed keys and all is working properly.? The key causing the problem works fine on a different radio.? Glad the radio is fine.
|
Led Zeppelin tickets for me. We stood in line to get a wrist band with a number, then they drew lots and we were 42nd in line at the University of Michigan Union. The first two rows were already sold out, because they were selling 8 tickets max to each comer.
We ended up on the floor of the Pontiac Silverdome, in the 3rd row.
Wow! Fortunately, we brought hearing protection.
73,
-- Dave, N8SBE
Quoting reallyoldjeep <reallyoldjeep@...>:
toggle quoted message
Show quoted text
#52533
That was fun! Brought me back to getting ZZ Top tickets years ago.
Tom
KC2VRH
|
Re: QDX batch 2 sell-out and status
Hans, we know you are doing everything possible to fulfill orders.? Thank you for the transparency and all your effort.? We all really appreciate it!
Glory to God in the highest, and on earth peace, good will toward men. Luke 2:14
|
Re: Missed getting a QDX again!
73 Hans G0UPL http://qrp-labs.com
-------- Original message -------- From: Marc Pressman <mapn4dr@...> Date: Fri, Dec 17, 2021, 11:20 PM To: [email protected]Subject: [QRPLabs] Missed getting a QDX again! ? I was a little slow on the computer, so I missed the second run of QDXs !
I am interested in obtaining a QDX from anyone in the USA who has?
one surplus to their needs. Please contact me off-line.
Thanks and 72,
Marc N4DR
n4dr@...
|
Dave KE?OG
JP McGinley KA3BWP
Dale Hardin KS4NS
Mike