开云体育

Hi Paul WHat is the link? 73 Hans G0UPL http://www.hanssummers.com

http://www.pongrance.com/gcrx-fixed.html Scroll down a bit on the page to find the lower cost partial receiver kit. Mike WE0H hans wrote:

I don't know, using 5068.8kc rocks would end up with a 2.4kc center freq in the audio output. Hans, what do you think? Mike WE0H Paul D wrote:

I've seen this too. My thoughts were to use the 18.138MHz crystals from Genesis radio (http://www.genesisradio.com.au/order.html) for the LO, and an 8 MHz IF. Clayton VK1TKA

MIke in the bfo circuit you could replace the trimmer cap with and inductor and move the bfo freq to the lower side of the "window" of the filter and rec upper side band ala Bitx20. the first mixer

http://www.pongrance.com/gcrx-fixed.html Sorry in my excitement I forgot to include this. I have the Norcal dds , which I contemplated using in a multiband Bitx. Not much has been written about 30

Hi Mike, Paul et al Certainly the frequency of the 5068.8 rocks can be pulled easily. One thing to bear in mind: This receiver is a very basic design utilising two SA602's. The strong signal

Clayton thanks for the link to Genesis. Nice offerings of kits, parts, and xtals. Mono caps npo at very attractive price! 73 Paul k5wms

Hi Hans, Add me to your list for the receiver kit. Tell me when and how you would like payment and I will get it to you fast. Many thanks, Mike WE0H hanssummers2000 wrote:

Another qrss site that may be of interest is Ralph's, W5JGV, online grabbers. Part 15 rules in the US permit unlicensed operation on 160 to 190 khz with 1 watt input to a 50 ft antenna. See

Greetings from sunny England, Those of you who have built the beacon kits will have noticed that we do not use NP0 caps. In fact I cannot remember the last time I used them. Yet these beacons are

Hi Steve et al Speak for your own part of England! Here in London, the sun has disappeared behind some thick clouds. Personally I think NPO caps might be useful sometimes, but generally are

my experience is not all npo caps are created equal. I suspect many are mismarked as happens with nuts and bolts. Mono caps or cog as they are sometimes called exhibit better stability. My beacon is

I have to agree with Hans . NP0 caps are fine in some applications , but not all . I just changed a pair of them out in a filter and replaced them with some high quality "glass" capacitors , which

NP0 caps become much more important when going cold... not such an issue for ham electronics which will likely never see temps below 0C Matt W8ESE sent from my VIC-20

I use that Lyle K0LR style thermistor crystal heater in my freq counter. It has maintained better than 1hz stability for over a year now. Mike WE0H Charlie , W5COV wrote:

As I figured would happen with a freebie website, they deleted my account tonight. No surprise there. So go to: http://www.we0h.us/argo/ and lets see how long that Grabber survives. This is my pay per

Good morning one and all, For those of you who are interested in learning how to program the AT Tiny chip (we use the AT Tiny 13 in the beacon kit) there is an excellent tutorial at

http://www.qsl.net/we0h/argo/ New server once again. Lets see how long this lasts before it locks up... Mike WE0H EN35hj

I HAVE CREATED A PHOTO FILE "K5WMS" WITH PHOTOS OF MY BEACON CONSTRUCTION AND INSTALLATION. ALSO INCLUDED ARE CAPTURES FROM KL1X/5 IN BARTLESVILLE,OK AND W4HBK FROM PENSACOLA FL. I AM IN CENTRAL