开云体育

Phil, I know this is a very old post but I have the same issues and was wondering if you were able to replace the component? I'm not sure if it is related but I am having issues with my initial

I thought I posted this this morning but can't find it, I hope I haven't made a duplicate post and apologize if I have. I just finished my first build, a QCX Mini in 40m. I'm having an issue during

Hi Hans, many thanks for the great QMX series. It become more and more fun working with them. Just ordered a QMX+ kit this week to have access to 160m and 6m too, had been building 2 QMX in last year

hi Hans and team, did the update few hours ago without any issues.... i like the QMX+ more and more ... you really did a GREAT job... thanks a lot and good luck to have such great ideas !! vy 73 de

Thanks for this Hans.? Maybe pin this thread instead of the 1_01_003 one. I've downloaded and updated on my QMX+ with no issues, currently reworking my antenna garden, will try soon. Chris, G5CTH

Hi all The firmware update is in the bootloader and is never updated. It's only the application firmware which is updated (by the bootloader). 73 Hans G0UPL http://qrp-labs.com

Hans and Erik This ought be a switchable option since one use case is that you use CAT PTT but still want to use the microphone- eg in a SSB contest using a headset with PTT coming from the keyboard

Jim, What firmware was on the QMX? I can't imagine how just downloading (and not installing) a new f/w could prevent the update from happening. Unless the previous f/w had a flaw, which seems

What I found was that selecting Firmware update and jumping through the hoops shuts the radio down.? Then when you press the Vol button it turns on in update mode, as a flash drive.? This is using a

There are two sections, one for items sent other than through the International post and the second for items sent through the post.? That seems to cover everything from China. This might not apply

*I thought it might be a better idea to do the radio on to the internet, I know there will be intellectual proprietary rights on internet, but I am listening older than 100 years old Turkish Classical

Have you checked using a different flash drive, that your Mac is showing external drives in finder? I believe there is a setting under Finder preferences to hide external drives. Does the QMX show up

Sorry, don't know what to tell you then... ? Paul ________________________________ Sent: Friday, May 2, 2025 9:15 PM To: [email protected] <[email protected]> Subject: Re: [QRPLabs] QMX Not

Paul, that’s what I’ve been doing, but there is no QMX device showing up to drop that file onto. -- Jim / K7TXA Eagle, ID SKCC 10447T BUG 301

Yes it is only from China and Hong Kong that there is no exceptions for under $800 dollars.?? Any other place stays the same until it might be changed. Jim KE0VVU

Jim-- On the QMX menu, tell it to do a FW update. That will (immediately, I believe!) put it into the mode where you can drop the file for updates. Pretty sure a power cycle isn't required, because if

It is really necessary to have a very clean, power supply with low ripple. This is especially noticeable on WSPR where you will see spurious signals either side of a strong signal on both RX and TX if

I also have a Raspberry Pi that I'm trying this on. Same issue - QMX shuts down waiting for the f/w but I have no way to see the QMX to move the downloaded file into it. I have two QMX+ rigs - both

Yes. When I telll QMX to do a firmware update, it does its normal power off sequence and waits for the f/w to be moved into it. It will sit like that till either the cows come home or you unplug power

Did you try cycling power on the QMX+? [email protected]> wrote: