开云体育

Glad that's worked for you, Walter. Job well done, Sir. The buttons on my rig behave well so I didn't add any caps to those. As for the encoders; They do deteriorate with age as the contacts become

Hi Dafydd Yes, it's easy. And as I happened to have the code open right now, I have added it. It's in the next firmware version. 73 Hans

Although it's true that technically BK is an abbreviation, so many people send it as a prosign without a space between the B and K that is has become a sort of de-facto prosign. If it's easy to add

Thanks for posting this modification. One of the main reasons I haven't been using my 1st rev QMX is because the glitchy encoders really got on my nerves! I'll be adding the caps shorlty and very

Hi Willem, BK is an abbreviation, not a prosign so should be sent as 2 characters and I think QMX is working correctly. 73 Jon G4IVV

P.S. I should also add that exactly the same list may be used in stored messages. 73 Hans G0UPL http://qrp-labs.com https://www.buymeacoffee.com/g0upl [email protected]> wrote:

Hello Willem There isn't currently a way to add prosigns. The decoder currently supports 0-9, A-Z and the following prosigns and punctuation only: Punc/Prosign Displayed Sequence Dash

I will send you my PayPal info. Paul Wamble K5EBP 214-405-5876 cell

I like using the QMX to practice my CW because it decodes it and shows me my errors, or for example when my pauses are too long within words. One thing I noticed is that it decodes some prosigns (like

Select and Exit caps placed. Can't see any double presses any more, so looks like more success. Photos below of button caps on a Rev 4 QMX and encoder caps on a QMX+. -- 73, Dan? NM3A

I want it. Is this biased for data, CW, or SSB? Is this the amp that does full break in CW? Paul Wamble K5EBP 214-405-5876 cell

Ronan, Manfred, I don't think age has anything to do with it. My early (May 2023) Rev 1's had the glitch from the beginning. My Rev3, Rev 4, and QMX+ Rev 1 all have the glitch. It seemed to be worse

I suggest? that Assume the amp will draw current? equivalent to? the? A for Watts = 2 x power out expected? (your guess ) then select a fuse 20% higher That will provide a back up for any

As Ron said whenever there is a serious VDD to GND short, it’s usually less than an ohm. ?On all the rigs I’ve fixed, it was about .4 ohm. I always build a QMX or QMX+ so that I can test the cpu

Thanks Chris and Doug. I did short it to ground when I completed the build and noticed the issue and confirm that this did turn it on but the ability to turn it off would be nice also. Somehow I

Today's firmware update to 1_00_023 ended up successful, but had me worried for a bit. Everything seemed to go OK until this happened: My windows file copy software does a consistency check after

Mark, 9K is what most are seeing, but my brother recently measured his brand new QMX+ board out of the bag and found 262R Vdd to ground. He installed the DC input connector and the two power supply

Hi Allison Thank you for your advice. BR Chris

Hi Chris, How do you get past the initial SMPS fault that stops the QMX at the hardware diagnostics screen? My QMX stops when the firmware determines that the boards are not present as described in

WARNING - WARNING To all Ham Husbands Please activate the Groups.IO Spy Filter before it’s too late!! Dave ve3zzy