开云体育

Here we found it easier to achieve precise alignment of the SMPS boards if the spacer nuts are NOT drilled out. The reason is that drilling them out, or shoving a soldering iron through them, either

Hans says it’s best to do it as he shows in the video to keep the boards properly oriented. Looked really easy to do the way he demonstrated. It’s an ongoing process of finding the best solutions

Does the QMX depend on having full USB3 support at the PC level, or can an USB Type C adapter be used? I am looking at ordering a QMX, but do not have USB3 available. I do have a multiple input USB3

So to clarify - The manual at Rev H currently says to burn or drill out the center of the spacer nuts on the power board - That is no longer recommended according to the video?

Perhaps this has already been reported, but in the Message menu, setting Interval to 7 seconds, and repeat to 3 only sends the message once (Message 1, if it matters). 73, Randy, KS4L

That’s my plan too. Got the QMX but upconverter is on the slow boat from China… PD seems risky. Another post about the PD negotiation and starting on 5V then a fast increase kills the QMX. Should

Does the QMX depend on having full USB3 support at the PC level, or can an USB Type C adapter be used? I am looking at ordering a QMX, but do not have USB3 available. I do have a multiple input USB3

Correct.

jlloydham, Could it be from the power supply?? Maybe a local RF source in the shack?? Long shots, as the sound system is all digital inside the processor. 73 Evan AC9TU

OT sucessfully build your interface for my ic706 the only problem i have is adjusting. I have mo sweet point where ptt gets triggered and alc is zero for ft8. Any idea ? Mny tnx/ /OT

I’m happy to do that for you. ?Only pay postage and parts plus whatever donation you want. ?I’ve done a bunch of these. send it to me at Jeff Moore 464 Route 28 Harwich Port, Ma 02646

I recently had a problem with my home internet. I noticed that when he replaced the modem or modem/router, he reused the existing power supply (wall wart). I asked him if I could have the unused power

Hello Hans, Thank you for the excellent Video. I think I can use it for the building of the QMX, which arrived me yesterday without any problems. Vy 73 de Dc4kjs

Hi Rick, There must be someone nearby who can help you out, just in case you want to try yourselves with a regular soldering iron: here is how I do it: 1. add excessive solder on both sides of the

That's exactly how I wound mine, Nick. Its also exactly as per the picture of the Stockton bridge in the NorCal power meter PDF linked earlier in this thread, so I think you are good to go. 73 Jon

Hello Sholto I made a note on your order 73 Hans G0UPL http://qrp-labs.com https://buymeacoffee.com/g0upl pm.me@groups.io> wrote:

If you have a soldering iron then you do have the equipment. Use a bevel or chisel tip.

Perhaps it's easier if I post a picture? Can anyone tell whether this is correct?

Hi All The use of audio as the universal way of transferring digital Signal modes between a PC and a radio transceiver makes lots of sense in many ways. Every radio transceiver for more than a

hello Nik, if they can help you but I'll give you some photos of my QMX, I'm waiting for the replacement power supply board because I got Q103 trying to unsolder it. 73 and have a nice day Giuseppe