开云体育

Adafruit GPS module working perfectly with the new firmware. My Trimble GPS which worked with ver 2.01 doesn't work with 2.02a but I half expected that as it's noted on Hans web site.. Love the

The updated software [and additional LP filters] arrived this afternoon. Clearly and competently packed, as before. Busy tonight, but I will try a couple of GPS modules tomorrow. I have high hopes

Hi all, I seem to be having some trouble with the new chip. The kit locks onto the satellites no problem and calibrates and sets the time fine but after a transmission period the time is wrong which

Yes Hans, that is basically it. Just like you do now for WSPR with the 4 digit locator but with the option to specify between 4 & 10 digits (depending on the accuracy/transmission time you want). I

Tony I never said I could do that for him. I just wanted to make sure I understood the question, first ;-) It sounded like rather a tall order. Do you know how long it took my feeble brain to work

Well, if you can do that for him, I want one that will turn the kit into a time travel device so that I can visit my ancestors and show them why they shouldn't have had any children BZB

Hi Colin You are saying an automatic locator, which gets the latitude and longitude from a GPS module, converts them into all those digits, and appends it with an accuracy specified by you? 73 Hans

Hans, My v2.02k arrived this morning and is now up & running under test and seems to be working just fine. I was wondering if it would be possible to append an automatic QRA function to the QRSS

Hi Group, I've installed the new V2.02a chip, but having problems when using WSPR. The transmission starts OK but at the end of the 2 minute period the RF does not shut down. Has anybody experienced

Thanks Hans, I don't have to wait any longer, my v2.02k chip and a couple of LPF filters arrived this morning (26th Jun 3013). Fitted the chip, put in some setting & fired it up & have already heard

That's quite a typical response for a receiver when it has a strong local signal overwhelming its front end and producing intermodulation products. Even though the UQ is qrp or even qqrp, when it is

OK, here's a good one. I'm running my QRSS grabber on 30m right now and sitting on top of the TS-590 is my U2 kit transmitting WSPR on 20m. When it's transmitting, I totally lose everything on 30m

Hi Paul, I saw you were spotted by VK7DIK. My working conditions are similar to yours (1W to low OCF dipole) and he spotted me too. Season seems to favor north/south paths on low bands. 73, Yan -

Thanks for the reminder Hans. I was just thinking ‘I wonder where my order has got to’. I guess I have a few more days to wait . I (and I’m sure most people here) understand and don’t mind

Good evening all A quick note about the shipping. Orders are normally shipped the next business day after they are received. The exceptions are: 1) When a huge volume of orders are received

Thanks. I was was heading in that direction, but thought I'd ask. Up here in the puckerbrush of Maine Radio Shack knows cell phone and almost nothing else, so I've got to order online !

Hi Frank, I used a separate 3.3v reg to supply pins 4 and 5 directly. no resistors were used anywhere on the gps unit. Pin 6 is pps and pin 2 is txd. Pin 3 is earth. Hope this helps. 73's De

How do you handle the additional 3.3VDC for the UP501 ?

I was surprised last night when no one on my continent copied my WSPR signal but I WAS copied for about an hour in southern Australia! 13360 km per watt on 80 meters I will take any day!

Just received my version 2.02a 20 minutes before heading off to work. Can confirm the unit fired up first time with gps working and calibrating the output. No fuss and no hassle. My gps is the UP501