Re: v2.02 firmware version coming soon...
Hi Hans (and group),
That's fantastic, I'm sure I speak on behalf of the whole group when I say 'Thank You' for that update and all the work you've put in providing enhancements and fixes.
73 Keith,
By
Keith Maton <nentecular@...>
·
#1277
·
|
v2.02 firmware version coming soon...
All
Just to let you know, I worked on the v2.02 firmware over the last week and
have completed it, I am now testing. On Monday I am planning to have a few
sent to some people who can also do some
By
Hans Summers <hans.summers@...>
·
#1276
·
|
Re: Ultimate2 statistics
Hi Michael
Your order 1050 of two U2 kits (20m and 30m) was shipped on 30-Apr-2013, it
was in the first batch to be shipped. If it does not turn up, I will have
another sent to you. However the kits
By
Hans Summers <hans.summers@...>
·
#1273
·
|
Re: Ultimate2 statistics
Hans,
From your spreadsheet, I see that the average number of shipping days to the US is 6.6. I ordered my kit on April 20, and it still has not arrived. If it was one of the first 200, my data
By
Michael O'Bannon <mob@...>
·
#1272
·
|
Re: GPS behaviour very inconsistent
Ha ha ha - LCD? I hadn't thought of that. Might be better off ordering
another kit and be done with it.
:)
I'll wait for the update in the software and order then. The old UQRSS1 has
stepped into
By
Tony Volpe <tony.volpe.1951@...>
·
#1271
·
|
Re: U1 kit - low Freq
Hmmmm.... Revisiting the board layout, apparently someone in this group (who shall remain nameless, with aging eyes) does not know the difference between a 3 and a 5. Wonder what happens when you
By
"Chris D" <kq2rp.cw@...>
·
#1270
·
|
Re: U1 kit - low Freq
Will try the C5 removal. Thanks gents. Did you leave C4 as 22 pf or 18?
72,
Chris
KQ2RP
By
"Chris D" <kq2rp.cw@...>
·
#1269
·
|
Re: GPS behaviour very inconsistent
Mine does this, but never give it a thought.
All the best Peter G8AEN
By
"Peter Helm" <peter@...>
·
#1268
·
|
Re: GPS behaviour very inconsistent
Ooops, sorry to hear that Tony :-( I have to admit to having done that
before myself, too...
I hope you didn't fry the LCD... I mean, at least one of three things could
be fried: DDS, chip,
By
Hans Summers <hans.summers@...>
·
#1267
·
|
Re: GPS behaviour very inconsistent
Thanks Hans.
I wasn't worried, because I know how dedicated you are to supporting these
kits Hans. They are brilliant fun for what they cost. I need a new AVR
anyway, being a complete arse, I
By
Tony Volpe <tony.volpe.1951@...>
·
#1266
·
|
Re: U1 kit - low Freq
I had that trouble and in the end I just left out the capacitor that was in
parallel with the trimmer. This allowed me to move a lot higher, even
though the tuning was made a bit more sensitive. I
By
Tony Volpe <tony.volpe.1951@...>
·
#1265
·
|
Re: GPS behaviour very inconsistent
Tony, Barry,
I agree, the GPS is not faulty. The U2 kit does appear to be a lot more
fussy about what GPS modules it will work with. Don't worry. This weekend I
will have a bit of time, and I will
By
Hans Summers <hans.summers@...>
·
#1264
·
|
Re: U1 kit - low Freq
IIRC you remove C5.
Me and Tony G0BZB did that and now we can tune both the QRSS and WSPR
segments.
73 de Andy
By
"andyfoad@..." <andyfoad@...>
·
#1263
·
|
Re: GPS behaviour very inconsistent
Good news Barry. Delighted your new GPS works with the new kit.
However, there is nothing wrong with the EM-406A. I've had one working with
the UQRSS1 for about ten months, day in day out 24/7. It is
By
Tony Volpe <tony.volpe.1951@...>
·
#1262
·
|
U1 kit - low Freq
Finally got around to fixing my dead U1 kit. Seems to be working fine except for low freq. Did the C4,5 cap change to 18pF from 22pF. Didn't seem to move it much. Highest I can get it is 10139.5 Will
By
"Chris D" <kq2rp.cw@...>
·
#1261
·
|
Re: GPS behaviour very inconsistent
Afternoon All
For several weeks, I've been struggling to get my U2 kit working with a EM-406A GPS module. The problem seems to be with the 1pps signal. as the NEMA data is read correctly.
Today, I
By
Barry Chambers <b.chambers@...>
·
#1260
·
|
Re: U2 and automatic frequency stabilisation
I ran my UQ1 in a shabby poystyrene box 24/7 for ten months on 10.140 and
it sat there like a rock. Looked rubbish; was rubbish, but it did a good
job.
:))
By
Tony Volpe <tony.volpe.1951@...>
·
#1259
·
|
Re: U2 and automatic frequency stabilisation
Thanks Hans.
It seems that although my new boxed unit is very pretty, it's rubbish as an oven as it drifted all over the place last night as the shack cooled down.
73 Keith.
By
Keith Maton <nentecular@...>
·
#1258
·
|
Re: Ultimate2 statistics
Hans,
I grew curious as to why two shipments of Ultimate kits might show a difference of more than a month in delivery time to the US. So I retrieved both packages from the basement and compared
By
Michael O'Bannon <mob@...>
·
#1275
·
|
Re: Ultimate2 statistics
Hans,
Yes, your records are correct. It does seem strange, particularly because I usually receive one or two packages of electronic parts from out of the country each month. The previous Ultimate
By
Michael O'Bannon <mob@...>
·
#1274
·
|