开云体育

Could we have another thread for these "Please add me" requests? This is burying ABS build information under a lot of other stuff! Just sayin' :-) 73, Paul -- AI7JR

Hi, I'm using an "upgraded" ATU-100 Aliexpress and a random-wire antenna, along with my QMX+. It works great after I made the changes according to the instructions in this YouTube

I just ordered the ATU-100 from the same seller on Amazon. Here's hoping it turns out to be the same experience. The listing I purchased states that it has the low power modifications, which I am

Those little audio amplifiers are pretty cute. Do you have a link? Dave

I use these little guys. Their advantage is a resting current of around 1 mA so if I iaccidentally leave it on its no disaster.

Thanks Ludwig I'm running Windows 11 on that laptop. It sounds like the firmware loaded, but since there is no display I can't tell. All the connectors look good and there is power to the display, but

This is on the latest QMX firmware, but I have noticed this on past versions also. I know that the exclamation mark is not used very frequently in most exchanges, but? I noticed the decoder was not

Oh yes I think I've gotten to that point in my life with toys! ??? Too bad you don't live in Dallas! ? Thanks Roy WA0YMH [email protected]> wrote:

I have a ZM-2 tuner and really like it. If you have a balanced line fed doublet the ZM-2 has a balanced input. I also use a T1 tuner with the easy tuning bridge from Pacific antenna and it protects

Thanks! ? Roy WA0YMH [email protected]> wrote:

Please add me to your second buy list. If there are options, I'd like a full kit. Also do you have a rough idea what the price would be? Thanks, Roy WA0YMH [email protected]> wrote:

Bob, it seems the firmware is running. In this state no USB drive is shown. If you are using Windows before V10? you have to Install a special driver. Please search the QRP Labs Wiki for this

I recently finished building my rev 1 12 volt QMX+ that I picked up at last years FDIM. After carefully rechecking I plugged it into a bench power supply set to 10 volts with a .25 A current limit. At

There are some good fabric /plastic anti static sprays - ? Had that with a new radio room chair and one spray on chair and carpet lasted 2 years so far

Oh sorry, I was looking for results from RF (filter) sweep and Test ADC I/Q. I'm not sure what the screen shot from the oscilloscope is showing, which testpoint is shown and which testsignal is

Thanks Randy, I'll check that out 73 comcast.net_at_groups.io_lastradioman@...> wrote:

It's a great thing to have a waterfall display on a radio. Even better, if it's from a second receiver, that can be used independently. That way, one station can be worked, while simultaneously

Paul wrote… Where did you manage to find it in kit form? Perhaps in his spare time Hans could make some tuners, 9:1 & 49:1 UN-UNs available! -- 73 Keith VE7GDH

Occasionally I reach for a knob on my QMX and get an ESD event from incompatibility between office chair and jacket.? After re-powering it works fine.? Wondering if anyone else experiences this.?

Another thumbs up for that ATU-10, though I probably got one of the lesser ones as it was only $30 last year from the seller I bought from (seems to be over $80 now).? It works fine though.?