开云体育

Many thanks!

Glen, I believe you have the 50w PA confused with the 10 watt linear.? The 10 watt linear was designed to work with the QCX.? As Hans stated, "The 50W PA was always designed for the QCX-series

Hi Chris I know I will be in a blasphemic minority for what I am about to say. I use Elsie for LC filters (as per the QDX manual for example). But I don't simulate anything else. So far I have found

Hello Mark The high bands kit is for the QDX. Not QMX. It can't be used in the QMX because the QMX uses smaller toroids to fit in the smaller available space. I will have a solution available in due

Possibly an incredibly stupid question, but I can't find the answer. ;-) Can the "high bands" kit (i.e. the one with different capacitors and toroids) for the QDX be used in the QMX? And is there a

Luc, You couldn't also enter a night time such as from 12:00 pm to 01:00 am. Thanks bye Giuseppe iu8eun Il Mar 18 Lug 2023, 11:31 GIUSEPPE via groups.io <iw8rsb@...> ha scritto:

Luc, I was reading the modalities, hours and days of the QCX PARTS, I will never be able to participate because I am always at work or away from home. Thanks bye Giuseppe iu8eun Il Mar 18 Lug 2023,

Hi Glenn The 50W PA was always designed for the QCX-series transceivers. 73 Hans G0UPL http://qrp-labs.com https://www.buymeacoffee.com/g0upl [email protected]> wrote:

Hi All This thread reminded me of some amplifier predistortion testing I did with the QRP Labs 10 Watt amplifier.? The 10W amplifier required a 1W (+30dBm) signal to provide 10W? output with a

Joshua,I bought this up shortly after the amp was made available and I checked mine.Apparently that's how it was designed as it's primary use was to boost a yet unreleased transceiver by

Hi all, Just wondering what you folks use to simulate or test your circuits before building them up on the bench? I am familiar with LTSpice, but have heard it is not great for RF circuits. At work

Hello Luc, I connected EI9JF , F5LCI and DL6UKW up to 1:20 am on 30 meters, the propagation was not excellent, on 20 meters it was closed. I'm having a lot of fun, I was with the qcx mini for 20m

Hi Mike I had to spread out the 9 turns a lot, I actually removed one turn; the 19 turns weren't fully spread out, I adjusted them to put the peak on the 20m band. I think everyone has a different

I missed the 13:00 session and was not very lucky on the 19:00 session. 2 QSO's on 30 m with one QCX but could not hear neither Luc nor Zdenek. 60 m 2 QSO's with surprisingly good reports but faint

@IU8EUN Giuseppe, I see you have figured it out already, but at 00:50 CET (22:50 UTC) you were probably alone on the Discord page ... My report 13:00Z bad propagation, only one QSO on 30m

Summertime and the liv'n is easy Summer time and the antennae are high One of these days' I'ma? gonna make an infantile post that don't rhyme But started out well... like a lot of half finished

My QCXMini was working fine with GPS (QLG2-SE) to set/keep the clock on WSPR. ?Now GPS time setting has stopped working. ?I switch between using it for CW and WSPR several times in a week. ?I tend

Running one milliwatt to the end-fed wire. The AH-4 autotuner requires about three watts or so in order to do its thing. So, I use any of my QRP rigs to do the tuning and then switch to QDX for

WY7AA just gave us a Q. Tnx OM. -- 72, Bill, N4QA

Ditto on doing what you enjoy and getting paid for it.