开云体育

Thanks ZL1UJG, -Dan VK5DJW

Hi, Its Murray Greenman ZL1BPU, who runs 100mW. Callsign he is using is ZL1EE.

If you have a look in the photo section under VK5DJW there is a capture pic... if it is a ZL1 I would like to know the power output :) -Dan VK5DJW

Hi, I have heard others mention that they had low power from their Hans Summers TX. Well one my fellow QRSSers in Hamilton has that exact same problem with his 30m one(after being modified to 12v PA

Hi, One of the fellow QRSS'ers in Hamilton while building the 80m TX, noticed a small problem. To achieve frequency he had to remove the inductor in series with the crystal, not unusual. He replaced

Dear all I have my 40m qrss beacon running now. Acording to my trusty meter, it is on 7.000.81 Any reports will be most welcome Thanks Tim VK4YEH

PS. He acheived 320 mW at ~ 52 mA PA current with a 13v PSU for the 2N7000. About 50% efficient Kevin ZL1UJG

Hi Re the Hans Summers 80m TX (and posibly other versions) Tom ZL1THG was unable to get his 80m TX on frequency . He bypassed the inductor with a short, leaving the tuning capacitor remaining.He still

Sorry, Freq is 10.140040 +/- All reports welcome 73 de Colin G1IVG

Hi Mike, I don't think we can make FDIM this year but I am planning to visit next year...I'll bring whatever kits we are selling then... 73s Steve G0XAR

Hi all, Just to let you all know I have built my 30m QRSS beacon kit (Hans Summers Kit) and it should be on 10.140085 more or less. It's only on 100mw as far as I know and I'm inteested if anyone

Are you guys going to be at FDIM 2011 with a receiver kit? I want to be first in line to buy one :-) Mike WE0H

Hi, I have another 100 kits to pack this week......so stock levels should be back to normal soon.. Steve -- It is vain to do with more that which can be done with less.

Hi After seeing the shop open again over the weekend, I talked to some other amateurs about some more purchases today, but returning from work, I notice its almost sold out again. Is it going to be

Hi Dan Driving the frequency shift with the tone test output is not a good idea in my opinion. Yes it will *look* like it is working Ok, but in fact what you are actually doing is then producing

Hi All, My beacon is on the air now it is transmitting VK5DJW on 6s slow The issue was the output form pin 3 of the chip, I was only getting something like 0.-0.9v out for freq shift, so i used the

Hi Arv K7HKL, Thanks for the advice I will try that out tonight, I have a couple of things to try now but I will add that to the list, I can definitely see the freq change when i touch parts near

Dan VK6DJW Try touching the oscillator area while watching it on Argo. You should be able to see it change frequency. It is possible that you are watching some other signal resulting from overload

Hi Steve, Thanks for your reply I appreciate the advice, I returned the led to the correct way around and I have about 15-20mm twisted tightly on the gimmick capacitor to try and get as much shift

Hi Guys, The shop is back open.....I have another batch of 100 beacon PCBs to kit. I'll be ordering more crystals and toroids... 72/3 de Steve G0XAR -- It is vain to do with more that which can be