开云体育

-------- Original message --------
From: "Michael Black via groups.io" <mdblack98@...>
Date: Tue, Jan 24, 2023, 6:37 PM
To: [email protected], [email protected]
Subject: Re: [QRPLabs] #qdx 1_08 firmware release

Apparently TX/RX does not work anymore -- that's what Hamlib uses...FLRig is using the newer TQ1/TQ0.


This 64-bit DLL has the change to TQ

So give it a try.? It goes in the WSJT-X bin directory.

https://www.dropbox.com/s/snmkzu8eif89yqs/libhamlib-4.dll?dl=0

Mike W9MDB





On Tuesday, January 24, 2023 at 11:20:21 AM CST, Cliff <ae5zaham@...> wrote:





Mike,

I haven't looked at the code for the QDX in flrig, but the firmware manual for 1_06 and on has Tx and Rx as commands as well as the TQ. They should all work.


73,
Cliff, AE5ZA



> On Jan 24, 2023, at 11:14, Michael Black via groups.io <mdblack98@...> wrote:
>
> I see that QDX apparently wants the "TQ" command for PTT control.
>
> What compatibility mode is that and why can't it use "TX/RX" like the TS-480 compatibility it claims?? At this point it should recognize either command to maintain backwards compatibility.
>
> And the QCX does not support PTT control at all?
>
> Mike W9MDB
>
>
>
>
>
>
>
>
> On Tuesday, January 24, 2023 at 09:54:42 AM CST, Cliff <ae5zaham@...> wrote:?
>
>
>
>
>
> Phill,
>
> Just a couple of things:
>
> - Get the newest flrig alpha from www.w1hkj.com/alpha/flrig. It has a fix in flrig that affected the audio quality with firmware over 1_05.
>
> - in Wsjtx select the rig as "flrig flrig" and use flrig for rig control. Makes life much easier. Set USB and Rig for Radio settings to let the QDX use Split.
>
> - I don't know about JTDX, but it may support using flrig as well.
>
>
> 73,
> Cliff, AE5ZA
>
>
>
>> On Jan 24, 2023, at 09:43, Phill via groups.io <rocinante2021@...> wrote:
>>
>> Well it didn't go quite as well as expected.
>> FLRIG and FLDIGI worked using QDX as transceiver in FLRIG.
>> WSJT-X and JTDX both receive fine but fail to turn on TX on the QDX. Looks like some incompatibility between them and HAMLIB. Probably some old files I've failed to clear out.
>> Once I've managed to get my wife off her Win 11 laptop I'll burn a copy of Ubuntu onto the sd card and take it from there.
>> Thanks again.
>> --?
>> Phill EA5JHA?
>
>
>
>
>
>