I see that QDX apparently wants the "TQ" command for PTT control.
What compatibility mode is that and why can't it use "TX/RX" like the TS-480 compatibility it claims?? At this point it should recognize either command to maintain backwards compatibility.
And the QCX does not support PTT control at all?
Mike W9MDB
toggle quoted message
Show quoted text
On Tuesday, January 24, 2023 at 09:54:42 AM CST, Cliff <ae5zaham@...> wrote:
Phill,
Just a couple of things:
- Get the newest flrig alpha from www.w1hkj.com/alpha/flrig. It has a fix in flrig that affected the audio quality with firmware over 1_05.
- in Wsjtx select the rig as "flrig flrig" and use flrig for rig control. Makes life much easier. Set USB and Rig for Radio settings to let the QDX use Split.
- I don't know about JTDX, but it may support using flrig as well.
73,
Cliff, AE5ZA
On Jan 24, 2023, at 09:43, Phill via groups.io <rocinante2021@...> wrote:
Well it didn't go quite as well as expected.
FLRIG and FLDIGI worked using QDX as transceiver in FLRIG.
WSJT-X and JTDX both receive fine but fail to turn on TX on the QDX. Looks like some incompatibility between them and HAMLIB. Probably some old files I've failed to clear out.
Once I've managed to get my wife off her Win 11 laptop I'll burn a copy of Ubuntu onto the sd card and take it from there.
Thanks again.
--
Phill EA5JHA
