Re: QCX Mini Volt meter neither pwr meter does not show value,
|
Bela, you have to connect a jumper from the 12 volt supply to the DVM input in order to see battery level. You also need to turn on the battery monitor function and set the full voltage and voltage step size per instructions in the manual in order to see the status of your particular supply voltage. It does not give an actual voltage reading.? The power meter requires you to connect a temporary jumper from the "Power Meter" input pin to the RF output of the transmitter. It should not be left in place for normal operation and it can't be used at the same time as the battery voltage monitor either as they both use the DVM input to the microcontroller. Please consult the manual for details on how to do this. 73 .. Ron? On Sun, Dec 4, 2022 at 2:11 PM Bela Mucs <mucsb@...> wrote: Hi Hams,? |
Ronald Taylor