Fernando,
Looking at your screen shots of the Pulse Audio Mixer you have the volume controls all the way max. The Volume Controls should all be at 100%. Going over that is not going to help and may cause distortion.?
I see since I started this that you seem to have got thing working, but still the volume controls all should be at 100%, an nothing more for best results. Adjust the QDX output to be what you need with the mixer levels at 100%.
toggle quoted message
Show quoted text
On Nov 12, 2022, at 23:02, Fernando TUSELL <
qrplabs@...> wrote:
My QDX seems to work, both on reception and transmision when? used with WSJT-X and a Raspberry Pi 4. However, all the decodes I obtain have a very low signal level, much less than what I usually get with my TS-850. I have the feeling that the sound configuration might be wrong and I tweaked it in different ways, but I do not really understand what I am doing. I enclosed some screes showing the the settings and WSJT-X main screen.
Is there anything obviously wrong? Ehat should I check next?
Tnx, 73, EA2BEE
<Captura de pantalla de 2022-11-13 05-31-42.png><Captura de pantalla de 2022-11-13 05-37-45.png><Captura de pantalla de 2022-11-13 05-46-15.png><Captura de pantalla de 2022-11-13 05-46-52.png><Captura de pantalla de 2022-11-13 05-47-42.png><Captura de pantalla de 2022-11-13 05-48-12.png>
