Hi AlThe colour codes are 5-band. Did you measure 38 ohms? That is the while 5-band code?73 Hans G0UPL?On Sat, Apr 20, 2019, 03:59 Al Lipinski <lipinski.al@...> wrote:Is there a reason I am left with one resistor that measures 38 ohms (Orange/White/Black)???All the white spacers in the kit will accept the screw in one end.? The screw wont fit in the other end of the spacer.?Al Lipinski?On Mon, Apr 15, 2019 at 8:50 PM Hans Summers <hans.summers@...> wrote:Hi AlYes. Non-critical. The most non-critical place for the low one would be C21 or C22.73 Hans G0UPL??On Tue, Apr 16, 2019, 05:48 Al Lipinski <lipinski.al@...> wrote:Section 3.16 of manual?Install 1uF capacitors (3).??I measured two caps at 0.978 uFI measured one cap at 0.775uF? ?.? About - 22% toleranceShould I install the low cap?????Thanks,?-- Al Lipinski -- Al Lipinski
Is there a reason I am left with one resistor that measures 38 ohms (Orange/White/Black)???All the white spacers in the kit will accept the screw in one end.? The screw wont fit in the other end of the spacer.?Al Lipinski?On Mon, Apr 15, 2019 at 8:50 PM Hans Summers <hans.summers@...> wrote:Hi AlYes. Non-critical. The most non-critical place for the low one would be C21 or C22.73 Hans G0UPL??On Tue, Apr 16, 2019, 05:48 Al Lipinski <lipinski.al@...> wrote:Section 3.16 of manual?Install 1uF capacitors (3).??I measured two caps at 0.978 uFI measured one cap at 0.775uF? ?.? About - 22% toleranceShould I install the low cap?????Thanks,?-- Al Lipinski -- Al Lipinski
Hi AlYes. Non-critical. The most non-critical place for the low one would be C21 or C22.73 Hans G0UPL??On Tue, Apr 16, 2019, 05:48 Al Lipinski <lipinski.al@...> wrote:Section 3.16 of manual?Install 1uF capacitors (3).??I measured two caps at 0.978 uFI measured one cap at 0.775uF? ?.? About - 22% toleranceShould I install the low cap?????Thanks,?-- Al Lipinski
Section 3.16 of manual?Install 1uF capacitors (3).??I measured two caps at 0.978 uFI measured one cap at 0.775uF? ?.? About - 22% toleranceShould I install the low cap?????Thanks,?-- Al Lipinski