¿ªÔÆÌåÓýI got the internal keyer issue
resolved.?
Oddly enough, it seems the problem was
RF feedback related to running into a dummy load that was setting
too close to the rig.? Later, when I put the rig on my dipole the
problem went away.? The long cord on my key probably didn't help.
The QCX 40 seems to be working great
this AM, heard? Chinese and Marianas Is. DX.
Power out is abt 3W on 13.8V, probably
try 16V later but want to make some heat sinking upgrades first.?
I rough calibrated it by zeroing my SDR
on WWV and then calibrated the QCX against the SDR on 40.? It's
close enough to find spots where they should be.?
The radio seems to be working fine but
the R24 and R17 adjustments did not go right.?? Both adjustments
are at minimum with the pots full CCW.? I can't "hear" any trace
of the other side band by ear, but I'd feel better abt the
situation if I could get a null.
There was a recent thread related to
that issue I'll review. ? Also could be my selections of R's
trying hit a 500 Hz CF,? might re-do those for 600 hz and see if
that flys straighter.
73 Jack KZ5A
On 4/13/2019 12:39 AM, Dave N3AC wrote:
|
