Hi,
I recently built a QCX 40M. I also built a QLG1 GPS unit.
Prior to calibrating with thew GPS, I would set the QCX to 7.117.00 but on my IC-7300 I would pick it up on 7117.35 (+/- a few Hz).
After GPS Cal, I have a much bigger discrepancy between IC-7300 and QCX. Setting g QCX to 7.117.00 requires the IC-7300 to be at 7.115.45 to both TX and RX with QCX.
Does this indicate that I need to redo all the alignment corrections again?
john
