Re: Very low RF output power
|
Howard
That's the spirit.? We can do it, because we refuse to give up. ? ? 8-)
Once you have an RF detector probe I think things will be much clearer as to where
the RF is, and where it is not.? Sometimes we get caught up in the idea that we need
fancy and expensive test equipment, when just a little knowledge and some fundamental
testing is totally adequate.? When you consider the chicken versus the egg, it becomes
obvious that knowledge came first.
Arv
_._
On Sat, Jan 27, 2018 at 10:33 AM, <hsilverwater@...> wrote: These were DC measurements on the bs170. I need to read about the RF probe, from the reference you sent me and then build or borrow one to make the measurements you are suggesting.?
Also, it was suggested that maybe I burned out the BS170, when the low pass relay board was in the circuit and caused a short between the RF out and ground? (now it out of the circuit)... but if I have these DC measurements now, it means that BS170 is still good. Yes?
Thanks again, for your time... we will solve the problem... (that's the spirit). I'll work on the problem during the week... in and around my volunteer work.
73 Howard 4x1zz
|
