Hi Bob.
Do you have a receive setup for WSPR? If so, see if you can decode your own signal. You will need to use a dummy load on your receiver antenna, and perhaps turn on any RF attenuators that your receiver supports, so that you don't overload it.
Roger
G3YTN
toggle quoted message
Show quoted text
On 2018-01-17 16:49, Bob Cutter via Groups.Io wrote:
My #308(no software upgrade)on 20 is operating well with several contacts, including 5 SOTA.?
?
However I have failed on WSPR. Same antenna and varied times so propagation should not be the culprit.?
?
External receiver and power meter show transmissions and GPS has good data. I have performed the GPS calibration of the transceiver.
?
I have varied the transmit frequency between 14.097.020 and 180.
?
Any suggestions?
?
72, Bob KI0G?
