Re: Soldering one pin headers
|
I've also used a rubber-band around the circuit board and stuffed something between the band and header or whatever component is being soldered. From: David Rushworth <david.1.rushworth@...> To: [email protected] Sent: Saturday, January 13, 2018 6:46 PM Subject: Re: [QRPLabs] Soldering one pin headers Hold with finger, position solder on other side of PCB and move board / iron to touch solder.? Bit fiddly but works and toughens up finger too ;-) David73 On 14 January 2018 at 09:26, Guy N7BIR <sgbridge@...> wrote: I like to use the small yellow roles of modeling tape for holding parts down while soldering.? |
Jeff KP3FT