But both devices have only three leges and are much easier to remove ;-) than a SI5351A or FST3253.
Klaus,
I'm not so sure.
Possibly the best way I have for removing that sort of device is an embossing tool. (Cheap hot air gun.) Cut a hole in some tinfoil the size of the chip, heat it and lift off.
Other ways include lifting one pin at a time, various methods, needle or wire under pins but more risky.
Resoldering, no problem. If you bridge pins use solder wick.
OK, I admit cutting off 3 legs and soldering to the stumps is easier but not if you insist on cleaning out the holes:-)
73 Alan G4ZFQ
