Sorry I stand corrected, n00b's pay not attention! Follow the manual... it does say if the power is low, remove a turn or two...
Now, having done everything at once... new problem: when I turn on and go to BPF menu I get only "1" for 30m, and "4" for 20m... but I tried to get something that may work on both 20m and 30m, so I wound this time 31:3:3:3 -- priority is to get this working no 30m, I'll try removing 1 to 30, and hope I don't have to make 4, 4, 4 as the BPF does say for 20m it will cover down to 9.6 MHz without too much loss I think. I also removed some turns on L1-L4 also with aim of getting it working for 30/20m.
Not tried on receive antenna yet, but, when I get to do the adjustments of I-Q bal frequency, Phase Lo and Hi frequency, I now have NO bars moving at all! So something appears to be very much amiss... I will do some more checking tomorrow with the help of someone experienced, e.g. connections of those toroids, and various voltages etc but, I'm just wondering if anyone knows that no data at all (no bars, nothing moving) in those adjustment menus may indicate as to a possible fault?
