Hello VK5EEE,
0.03 mm diameter difference will make zero measurable or effective
change, in fact it's surprising how little defence the inductance is
with even extreme differences in wire OD for winding coils. You could,
if you could fit the windings on in a similar fashion, use 1.5 mm OD
or 0.5 mm and probably not be able to measure an inductance change
even with good test gear. Start re-winding :)
Wednesday, November 1, 2017
toggle quoted message
Show quoted text
I made a mistake on my T1 and it's likely easier to rewind using
new wire as otherwise it may be short... instead of the 0.33mm wire
can I use 0.3mm wire without detrimental effect? Secondly, will I
need to calculate a different number of windings than the 30, 4, 4,
4 for 30m for the default 0.33mm wire?
--
2E0ILY
Best regards,
Chris mailto:chris@...
--
Best regards, Chris Wilson (2E0ILY)
