|
John Randall
Hi Hans, I am quite willing to pay for another kit. My soldering is up to scratch as I have done a lot of microwave stuff and spent many years soldering from 10 yrs old to present, so I know that's good. I did recheck the soldering again and its fine. Anyone? have active pin voltages for the atmel chip and also on the DDS board? 73 John ? Digitally signed mail -
M0ELS From: Hans Summers To: [email protected] Sent: Saturday, 3 August 2013, 6:02 Subject: Re: [QRPLabs] Dead lcd
?
John I am happy to replace a dead LCD or dead DDS or dead chip.? BUT, I have to note here, that in the majority of cases where someone believes they have a dead component, it is usually something else wrong. A poor connection somewhere, poor power supply, poor something. I find when I build something, I am unconsciously remarkably unwilling to give much weight to the idea that I might have made a mistake. Usually the problem is something *I* did, not something wrong with a component!
So all I'm saying is - be really sure - then as a last resort, I can send you some replacement part! 73 Hans G0UPL
On Fri, Aug 2, 2013 at 9:32 PM, John Randall <m0els@...> wrote:
|
