John,
Check Frame option. It should be greater than 2. I use 4, thus giving me 2 minutes on, 2 minutes off.
Don
toggle quoted message
Show quoted text
--- In QRPLabs@..., "andyfoad@..." <andyfoad@...> wrote:
Hi John,
When you say does not stop tx'ing I presume you are lstening on a
nearby RX.
If so then what you are probably hearing is the bare DDS output
breaking through at a low level which I think is quite normal.
Upon the next TX cylce you should see it restart at full power
again.
73 de Andy
--- In QRPLabs@..., "john349624" <g4pir.john@> wrote:
Received my QRSS kit2 today.
Built it and started testing on wspr.
everything runs ok, except that after the 2 minute tx period in wspr the display switchs back to the clock and displays the next tx cycle time, but the RF Output don't stop, it just keeps on txing , only way to stop it is to cycle the power, then start from scratch again.
Any ideas???
G4PIR.
