Ok Barry, glad you found the problem. Are you going to use gps in the future?
------------------------------
On Sun, Jun 30, 2013 11:23 AM PDT Peter Douglas wrote:
>Hi Andy
>Your email prompted me to make the obvious check: connections,
>
>I use females headers to the male pins on the pcb so I can remove the unit and other bits easily. Of course, one connector, feeding the common to S1 and S2, had failed!! Curious after 24hrs continuous use.
>
>Back in service now, and back to frequency calibration.
>
>Thanks for the reply. It really is a great little kit.
>73
>Barry
>
>
>________________________________
> From: Andy Cutland <
gj7rwt@...>
>To:
qrplabs@...
>Sent: Sunday, June 30, 2013 3:57 PM
>Subject: Re: [QRPLabs] u2- v2.02a
>
>
>
>?
>
>
>Hi Barry,
>
>I think whats happening is the kit is waiting for the next transmit cycle so you may just have to wait a while after powering up before you see anything on the lcd. Did you have any number in the frame setting and start setting?
>
>73's
>De Andy
>
>------------------------------
>On Sun, Jun 30, 2013 3:45 AM PDT denyergr23 wrote:
>
>>Help please.
>>Just received v2.02a, inserted same, entered call-sign, message and other variables etc, and ran for 24 hrs to enable recalibration for time. After adjusting the ozzy for time, pulled the plug to reset frequency for frequency adjustment. On switching power on, clock starts from zero, fine, but neither button now does anything. So, I can neither reset time nor anything else! Have I missed something?
>>73 Barry M0HBM
>>
>
>
>
