The manual is very specific and there are plenty of pictures. Each toroid has a set number of turns. Follow the instructions. Prepare the ends by scrapping and heating the end when you install?
them. After each toroidal is installed, measure for continuity. The instructions are very complete.
toggle quoted message
Show quoted text
On Apr 12, 2025, at 2:45?PM, Andrew (W3AWC) via groups.io <callsign.W3AWC@...> wrote:
?
Hi All,
I'm very new to building kits, and radios in general. Working though my 60-15m QMX and I am at step 2.12 where I am winding and attaching L511, L506, L512, L508, L513, and L510 and I wanted to confirm that winding number 0 should go on the outside through hole for each inductor and the final winding should go through the hole that is closer to the center of the toroid?
This seems to be the way it should be, following the instructions from L502 but I wanted to be sure since I have not been able to find a clear picture online showing how these inductors are mounted and there are not explicit instructions in the manual for these specific attachments.
?
Thanks in advance!
Andrew
--
Gary W0CKI
