In a spirit of double and triple checking everything, I rechecked continuity for my connections on T507 and T501.? T501 had intermittent continuity between two of the primary windings.? After reflowing the connections, I am now getting a signal out of the BNC connector when I hit Transmit and the SWR has stabilized going into the dummy load at close to 1.0 (except on 6m, which is fluctuating between 2 and 4).? However, I am still getting the extremely low SMPS bias current, and Diagnostics still reports 0W output.? The power meter on the dummy load is showing a little power output (possibly as high as 5W for 160m and 80m, but going down for successive bands).
?
?
