Just finished my QMX+ and really enjoyed the build. Built a QDX a couple of years ago and it has been great.
Powered up at 9 volts and no smoke! Draws about 100 ma and audio out can be controlled and tune appears to work and mode / band does something. Connecting an antenna increases the noise so it appears the receiver is working.
But nothing appears on the display except for the backlight. Turned the pot from stop to stop with no results.
I’m going to touch up all 16 of the display header pins. What a bad place for a soon to be 83 year old duffer to be soldering. Why couldn’t that bave been added to the display board before mounting?
Any other thots?
72/73
Jim w0nkn
