On Fri, Apr 4, 2025 at 09:49 PM, Damon wrote:
with IC204 CLK2 into IC501 is 100% @ 3.3V on pin 4. Not sure yet if IC204 or the main mCPU are faulted,
Damon, I wouldn't enjoy the RX. I wouldn't switch on the QMX in this state. Maybe voltage at IC204 is wrong because of IC503 died together with the PA. Best way is to remove IC503 and check output of IC501 and IC502.
?
And if the main mCPU would be faulted you couldn't switch on the QMX.
?
73 Ludwig
