And as noted in the assembly instructions ...
WARNING: the jumper wire must sit flush
down on the board. Otherwise it will short
with the metal body of the SMA
connector!
I insulated mine with a thin piece of shrink tubing.
Using a small gauge of insulated wire instead of a lead cutoff and tubing would work too. Get it close and flat on the PCB.?
G
On Thu, Apr 3, 2025 at 6:23 PM, Rick Hill via groups.io
<6xraytango@...> wrote:
The GPS vdd or vbat setting is a wire link on the PCB.
de VK6XT?
