In my experience, practically there are undesirable effects including loss of bandwidth (meaning reduced power at higher frequencies), lower power output and lower efficiency. It's my opinion that AC coupling would cause more problems than it would solve.?
On Thu, Apr 3, 2025, 14:53 mux_folder2001 via <canthony15=[email protected]> wrote:
It occurred to me that the Interface between the ACT08 drivers and the BS170 gates could be AC coupled. A quick simulation with 100nf and a 2k to ground on the gates shows no ill effects. The advantage is two-fold. First, a BS170 failure that puts 12V on the gates is less likely to damage the ACT08 outputs. Second, any failure that leaves the ACT08 outputs high for a long time is less likely to fry the BS170s.?